1 ton electric pallet truck sales talk about how to spend the running-in period with the new pallet truck

The newly purchased pallet truck may not be very smooth, and many functions may be unskilled to operate, which requires a period of human-machine running-in. The sales of 1 ton electric pallet trucks should tell you that the new car should not handle heavy goods in the early stage of running-in. Next, we will tell you what to do in the first 100 hours of the initial run-in stage of the new car, and how to maintain the new pallet truck.

First check carefully whether there is any problem with the equipment. Oil changes and lubrication should be done earlier than specified. If it is in normal condition, warm up the pallet truck before driving, no matter what season it is. Avoid emergency braking and emergency steering during driving. We recommend that you start slowly. Do not run the engine at high speed with no load.

The safe driving of electric pallet trucks is more than the responsibility! In order to reduce the occurrence of more electric pallet truck safety accidents, 1 ton electric pallet truck sales hope that the majority of electric pallet truck drivers should keep in mind not to drive the pallet truck in the following situations:

Steady and resolutely do not start; safety equipment is not in good condition and resolutely does not start; the door is not properly closed and resolutely does not start; the seat belt is not fastened and does not resolutely does not start; the cargo is not loaded and does not resolutely does not start; Start up; the frame station person is not determined not to start; the equipment is too long, super high, and overloaded, and it is not started;

If the electric pallet truck has not been used for a long time, it is recommended to lubricate the bearings once within two weeks of starting to use. When adding lubricating oil, pay attention to use new oil to squeeze out all the old oil, and lubricate it more than twice. Remember to clean the oil caps, plugs and nipples of dirt before lubricating the bearings to prevent dirt from falling into the inside of the pallet jack structure.

There is another point, the sales of 1 ton electric pallet trucks think that they need to remind everyone to pay attention. When injecting the lubricant with the grease gun, it should be injected into the joints of the parts until the lubricant is squeezed out. Change the seasonal lubricant or oil in summer or winter, and the performance of the whole vehicle parts of the lubricated electric pallet truck can be optimized, thereby improving work efficiency!

When you find yourself in need of pallet stacker truck hand pallet truck manufacturers, you may not know where to begin. And that's OK! Search out Ningbo Staxx Material Handling Equipment Co.,Ltd. to handle your pallet stacker truck needs.
For details on pallet stacker truck, see Ningbo Staxx Material Handling Equipment Co.,Ltd. at Staxx Pallet Truck.
pallet stacker truck allows users to apply in different ways for satisfying their needs.
The unique connections between pallet stacker truckmanufacturing and customers happen when you find ways to relate on a more personal and engaging level that goes beyond a product.
There are many advantages associated with .