All Electric Pallet Truck Battery Maintenance

As an important accessory for power, the importance of batteries is self-evident. The common sense of battery maintenance for all electric pallet trucks is as follows:

1. Preparation before use

1. Lean forward to read the manual in detail, keep the battery away from flames, sparks, and cigarette butts, and keep it ventilated after charging. The battery may explode if misused.

2. Pay attention to personal protection when working next to the battery while charging the battery. The battery contains sulfuric acid liquid. Avoid contact with skin, eyes, and clothes. Once in contact, rinse with plenty of water immediately.

2. Battery maintenance and precautions

1. Check the liquid level every other week. If it drops, please refill it with distilled or purified water. The surface of the battery, connecting wires and bolts should always be kept clean and dry. If there is acid, it should be wiped off with cotton gauze dipped in alkali solution, then rinsed with clean water and dried. During cleaning, do not allow alkaline solution to enter the battery.

2. The connection of the battery must be kept in good contact, so as not to cause sparks to cause the battery to explode or the pole to burn out.

3. The battery should avoid over-discharging, strong charging and insufficient charging. Failure to do so will shorten battery life.

4. Do not allow any harmful impurities to fall into the battery. The instruments and utensils used to measure the concentration density, temperature and liquid level of the electrolyte should be kept clean to avoid bringing impurities into the battery.

5. Do not place any conductive items on the battery cover, so as not to cause an external short circuit of the battery.

6. After the battery is discharged, it should be charged in time. The maximum interval should not exceed 24 hours.

7. If the battery is lagging behind during use, the cause should be found out and repaired immediately. If it cannot be repaired, the battery needs to be replaced.