Analysis on the fault of electric stacker

Electric stacker, for this website product, we will continue to study in this area today, because it is not only very important to us, but more importantly, its understanding is not comprehensive and complete, so It is necessary to continue, so as not to waste the previous efforts, so that everyone will not be worth the candle.

There are various faults of electric stacker, but today, due to the limited space of the article, we will explain and analyze some of them. The specific content is as follows.

Fault problem 1: The noise of the transmission system of the electric stacker is too loud
1. The gear or bearing is damaged, and the involute pin groove of the gear is worn. At this time, the gear or bearing should be replaced.
2. The amount of lubricating oil is insufficient or the oil has deteriorated. At this time, lubricating oil should be added or replaced.
3. The oil seal or liner is damaged, and the oil seal or liner should be replaced at this time.

Fault problem 2: The electrical system of the electric stacker does not work

1. The wiring of the power cord is bad, and it should be checked and corrected at this time.

2. There is a problem with the battery connector, and the battery connector should be replaced at this time.