(1) Electric pallet forklift
The primary function of electric pallet forklift is to move pallet goods from point to point on the plane, so there is no mast lifting system, which is suitable for transportation , There are three types of self-propelled type, stand-on type, and seated type for occasions where no stacking is required, and the cost is different.
(2) Electric pallet stacking forklift
The electric pallet stacking forklift is a light-weight indoor stacking setting, which is built on the side for stacking function, because the body is simple and convenient. It is suitable for the handling of light and small materials in floor-type stacks or other narrow occasions.
(3) Front-moving forklift
The lifting organization of the front-moving forklift may be moved longitudinally in succession. When the goods are crossed. The weight of the goods falls within the four fulcrums formed by the wheels. Therefore, the reach forklift has good flexibility, high lifting safety and stability. The load-sinking boundary is usually 1 to 2.5 tons, and the lifting height can reach 12 meters. But given that the wheels are smaller. Due to limited transitability, complicated structure and high cost, it is suitable for occasions with small space and high lifting height conditions, and is mostly used in high-rise warehouses.
(4) Universal electric forklifts
Universal electric forklifts can be driven in universal directions, except for the primary characteristics of balanced sinking forklifts, the three wheels can be oriented at any angle It is driving in different directions, so this model has a flexible steering. After the goods are crossed, you can turn the forklift in a limited place on the left card and move the forklift to any direction. This model handles the abnormal steering of the long material in the narrow space, which greatly saves space. It may be possible to complete the diagonal stacking and destruction in the train and car compartments.
(5) Four-way electric pallet truck
The four-way electric pallet truck integrates the functions of a forward-moving forklift, a side fork, and a balanced sinker forklift. In structure. It is basically the same as a forward-moving forklift. The mast is located between the wheels of the front and rear. There are two arm-shaped protruding legs at the outpost of the car. The front of the legs is equipped with supporting wheels, and the goods can be placed on the mast The forklift moves longitudinally one after another. When the forklift is unloading, the fork is extended, and after the forklift is unloaded, the fork returns to the middle position close to the vehicle body, so the driving stability of the forklift is greatly improved. The difference between the forklift and the forward-moving forklift is that the two load-bearing wheels at the front end of the fork legs of the four-way electric pallet truck can be rotated 90° through the steering organization. When the rear wheel has rotated 90°, all forklifts can be changed from the driving form to the spot on the spot. Traveling up and down is much better than side forks, so long material handling with narrower aisles is appropriate. The minimum channel width can often be within 2 meters. However, due to the complicated structure, the cost is high. pallet stacker truck
has become a standardized way of dealing with electric stacker.
Visit Ningbo Staxx Material Handling Equipment Co.,Ltd. for the best in supplies: Staxx Pallet Stackers
With innovative technology, our professionals can spend more time focused on strategies that will improve pallet stacker truck’s quality and deliver a more positive customers experience.
We afford not only the best product but also the comprehensive service, satisfy the customer's demands.