Correct operation process of pallet truck

(1) Check the vehicle before driving

(1) Before the pallet truck operates, check the appearance and add fuel, lubricating oil and cooling water.

(2) Check the performance of starting, running and braking; check whether the lights and sound signals are complete and effective.

(3) The oil and water leakage should also be checked after the pallet truck is running.

(4) During the operation of the pallet truck, check whether the pressure and temperature are normal.

(5) Fill in the daily inspection record form for pallet trucks.

(2) Start correctly

(1) Before starting, observe the surroundings, and after confirming that there are no obstacles hindering driving safety, honk the horn before starting.

(2) When the pallet truck starts with load, the driver should first confirm that the load is stable and reliable.

(3) Lightly step on the accelerator when starting, and start slowly and steadily.

(3) Stable driving

(1) When driving, the height between the bottom of the fork and the ground should be kept at 300-400mm, and the mast should be tilted backwards .

(2) Do not electric pallet lift truck the fork too high when driving. When entering and leaving the job site or while driving, be careful that there are no obstacles in the sky. When the load is traveling, if the fork rises too high, it will increase the overall weight and height of the pallet truck, which will affect the stability of the pallet truck.

(3) After unloading, the fork should be lowered to the normal driving position before driving.

(4) When turning, if there are pedestrians or vehicles nearby, a signal should be issued and high-speed sharp turns should be prohibited. A sharp turn at high speed can cause the vehicle to lose lateral stability and tip over.

(5) When the pallet truck goes downhill, it should drive backwards to prevent the goods from falling upside down.

(6) The pallet truck must abide by the traffic rules in the factory during operation, and must maintain a certain safety distance from the vehicle in front. Except in special circumstances, it is forbidden to brake suddenly while driving with a load.

(7) When the load is traveling up and down the slope, the brakes shall not be used except in special circumstances.

（8）Unless under special circumstances, it is forbidden to brake suddenly while driving with a load.

(9) The steering of the pallet truck is controlled by the rear wheels, so you must always pay attention to the swing behind the car to avoid the phenomenon of sharp turns that often occur when beginners drive.

(10) The internal combustion pallet truck turns on the ramp and should not drive across the ramp.

(11) Turning on ramps is prohibited, nor should you drive across ramps.

(12) When the pallet truck is running, the load must be in the lowest position that does not hinder the driving, the gantry should be properly tilted back, and the load should not be raised except when stacking or loading. When carrying large objects, the object blocks the driver's sight, and the pallet truck should be driven at this time.

(13) The pallet truck must honk the horn when entering and leaving the workshop, turning, reversing, and crossing intersections to prevent accidents.

(4) Safe loading and unloading

(1) When using the fork to pick up the goods, the fork should be fork as deep as possible under the load, and also Be careful not to touch other goods or objects with the fork tips. The smallest gantry should be tilted backwards to stabilize the load to prevent the load from sliding backwards. When lowering the load, the mast can be tilted forward a little to facilitate placing the load and extracting the forks.

(2) The height of the load shall not block the driver's sight.

(3) During the loading and unloading process, the pallet truck must be braked with the brake.

(4) When the fork is approaching or evacuating the item, the speed of the vehicle should be slow and steady. Be careful not to crush the item, wooden pad, etc. on the wheel, so as to avoid the crushed object flying up and hurting people.

(5) When fork-loading items, the distance between the two forks should be adjusted as needed, so that the load on the two forks should be balanced and not skewed. Provisions for center curve signs.

(6) It is forbidden to fork goods at high speed and collide with hard objects with the fork head.

(7) When the pallet truck is operating, it is forbidden to carry people.

(8) Pallet truck fork operation, prohibit personnel from standing around the fork, so as to avoid the collapse of goods and hurt people.

(9) It is forbidden to use forks to electric pallet lift truck personnel to work at heights to avoid accidents from falling from heights.

(10) It is not allowed to use the brake inertia to slip away items.

(11) When the pallet truck is operating, it is forbidden to stand on the fork.

(5) Finish work and get off work

(1) The pallet truck needs to be wiped clean to keep the appearance clean and free of oil.

(2) After using the pallet truck, the front end of the fork of the pallet truck should be attached to the ground to avoid injury to people.

(3) After parking, you need to tighten the handbrake to prevent the car from rolling.

An increasing dependence on the use of pallet stacker truck battery operated pallet stacker has made numerous changes in the pallet trolley industry over the past decades.
Crazy about products? Ningbo Staxx Material Handling Equipment Co.,Ltd. is the place you must shop at, do visit Staxx Pallet Truck to check out our latest collections!
Turn to Ningbo Staxx Material Handling Equipment Co.,Ltd. if you are looking for premier pallet jack for sale solution, affordable packages, and quality pallet stacker truck products! We produce wide series of high quality, first-class , and provide professional pallet stacker truck services at great prices.
There's the area of manufacturing pallet stacker truck that's becoming very important. If you can create those things, you build this closed bond.