Correct posture of pallet truck for safe operation of electric stacker

Compared with manual trailers, electric stackers are between manual hydraulic trailers and dynamic balance electric pallet trucks. They are faster and more efficient to use, and they are lower cost and space-saving than pallet trucks. They are widely used in enterprises. Warehouse, workshop stacking, truck loading and unloading.

The operation of electric stacker is simple and easy to learn, but relevant safety training should be carried out before use, so that warehouse managers and stacker operators understand the features and characteristics of all-electric stackers. structure, master the operation process, precautions and daily maintenance of stacking and racking. When training operators, they must be in the open space. They can only be used on the first and second floors of the shelves after they are basically familiar with them. After a month of familiarity, they can carry out the third, fourth and fifth floor stacking operations.

【Specific operation method】

1. Start the electric stacker.

Make sure the battery is fully charged and the indicator light is on. Press the electric lock button, turn it clockwise, electric pallet lift truck the emergency stop switch, and start the stacker.

2. The electric stacker moves forward/backward.

Turn the control handle of the stacker to your side and tilt down appropriately. (Leave the vertical position, but don't press down to the Z-small position), then use your thumbs to turn the two push-button switches. If the switch is turned forward, the stacker will move forward, and if the switch is turned backward, the stacker will move backward.

The speed of forward/backward is controlled by the rotation angle of the rotary switch. When starting or the surrounding space is small, for safety, the rotation angle should be controlled small to slow down the driving speed. There is a low-speed button on the handle, which is limited to low-speed driving when pressed.

3. The forks of the stacker are lifted.

Use your fingers to press the button of the control handle to raise the mark to make the fork go up; press the button of the down mark to make the fork fall, and stop lifting immediately after releasing it.

4. Belly safety switch (also called emergency stop switch)

When the stacker goes backwards, if the body collides with the red belly switch, the stacker will stop immediately and move forward. Move a short distance, mainly to prevent the body from being pinched and injured.

5. Conventional stack height parking.

When the stacker needs to stop smoothly, release the handle and the rotary switch will automatically reset. At this time, the controller generates a reverse current, and the stacker will move to a small distance. Park smoothly.

6. Vehicle charging.

If the watt-hour meter emits a flashing signal, it should be charged in time. When you are charging, turn off the electric lock first and remove the key.

7. Loading steps.

7.1 Move the stacker to the front.

7.2 Raise the fork to a suitable height below the weight base.

7.3 Move the stacker forward so that the forks are under the weight.

7.4 the pallet truck until the load reaches a certain height.

7.5 The stacker moves backwards with the heavy objects until there is room for falling at the fork.

7.6 Slowly lower the weight to an appropriate height before moving.

8. Steps of placing objects.

8.1 Move the stack with heavy loads to the front of the rack.

8.2 the weight to a suitable height.

8.3 Move the stacker forward to the designated position.

8.4 Slowly reduce the weight so that the bottom of the heavy-object pallet falls on the shelf.

8.5 Move the stacker and its forks slowly from the rack.

【Precautions for operation of electric stacks】

1. Employees must be trained and qualified before they can take up their posts.

2. Do not exceed the stack height vehicle load limit.

3. Don't lift the fork too high when you need to move, lower the fork to an appropriate height when you need to move.

4. Do not use sick or faulty cars, and seek professional repairs in time.

5. The battery should be replenished with distilled water in time.

6. Remove the key immediately when the electric stacker is not in use.

[Daily maintenance of electric stacker]

The operator must check the 'Daily Inspection Table of Electric Stacker' every day. If there is a problem with the safety device or other parts When there is a potential safety hazard, stop using it, place a 'dangerous operation, prohibited operation' sign in a conspicuous place, and seek professional maintenance in time.

In daily maintenance, it should be noted that the appearance of the stacker is kept in good condition, any damage should be recorded and reported in time, and the reasons for collisions and scratches during operation should be avoided to avoid recurrence.

The warehouse manager or operator is responsible for the daily cleaning of the stacker to avoid storing debris on the stacker.

The stack height equipment needs regular maintenance and should be carried out by professionals. There should be maintenance records and maintenance records during maintenance.

.

Ningbo Staxx Material Handling Equipment Co.,Ltd. has an array of branches in domestic for servicing customers with high-quality products.
Our vision is to realize the tremendous potential of pallet stacker truck by providing powered pallet truck services that consistently meet our customers’ expectations.
There are multiple advantages of having a +pallet +jack +supplier pallet stacker truck from responsible drilling machine exporters such as Ningbo Staxx Material Handling Equipment Co.,Ltd., as they adhere to all the quality standards as you can list and supply all +pallet +truck +manufacturer essential for the operation of the device without any difficulty.