Electric Pallet Production Share Electric Pallet's drive board short circuit will cause it to move slowly

With the development of the logistics and warehousing industry, electric pallet trucks have played an important role in the warehousing industry. When the goods are too heavy or the stacking place is too high, the electric truck can be used, which saves manpower and time to a great extent. refer to pallet stacker that operate on electricity, and most of them work with batteries. The battery is a kind of battery, its function is to store limited electrical energy and use it in a suitable place. It works by converting chemical energy into electrical energy. In order to ensure the normal operation of electric trucks, inspection and maintenance are also required. Let's talk about the manufacturers of electric trucks.

When the electric truck moves slowly, the following items can be checked for the following electric truck accessories:

1. Inspection Check whether the battery voltage of the accessories of the electric pallet truck is too low. If the voltage is no problem, check whether the battery power is enough to replace the normal operation of the electric truck. The exclusion methods are: if the battery has no voltage or the voltage is too low, directly charge the battery to supplement the power.

2. Check whether the electric truck drive accessories such as switches and lines are loose or short-circuited, and whether the microswitch is damaged. Remedy: Repair and clean the line, replace or repair the micro switch.

3. Check whether the drive contactor assembly of the electric truck accessories is burned out or the coil is short-circuited and open or has poor contact. Remedy: repair the platinum contact of the electric truck contactor or directly Replace with a new hydraulic contactor assembly.

4. Check whether the driven module is burnt out or is short-circuited or open-circuited. Remedy: Repair or replace the module assembly.

5. Check whether the driver board or power board is burnt or short-circuited.

6. Check whether the drive motor has power supply voltage, check whether the motor has short circuit or open circuit and leakage, and check whether the carbon brush is seriously worn. Remedy: repair the line, replace the carbon brush of the motor and the copper head of the motor, repair the hydraulic motor assembly or replace the new hydraulic motor.

7. Check whether the electric truck accessories drive gearbox, gears, angular teeth or drive wheels are damaged. Remedy: disassemble the damaged repair or directly replace the new gearbox assembly, gears, etc. If it is damaged, replace it with new gears, replace with new horn teeth or drive wheels.

Maintenance of electric truck:

1. the wheel during a test drive, so that even if there is a wrong connection, it will not cause danger.

2. When charging the battery, it is necessary to completely separate the charging circuit from the chopper, because in addition to affecting the charging of the charger, the overvoltage generated by the charger will also damage the chopper.

3. Special attention should be paid to the wiring from the battery to the electric control should be arranged in parallel and as short as possible.

4. It is recommended to implement forced ventilation on the controller when the vehicle is operating in a place with harsh working conditions and difficult ventilation.

5. Do not decelerate when turning, drive when the load is increased, lithium pallet truck is overloaded, drive on inclined or soft ground, etc. The driver should try to avoid these unsafe operations when operating.

6. Regularly clean the dust inside the DC motor, check the carbon brushes and springs.

7. If the electric pallet truck is not used for a long time, the battery should be fully charged and put on hold. And keep charging about 1-2 months apart.

The above is what Xiaobian introduced to you about the inspection and daily maintenance of electric trucks when there is a problem. I hope it can be helpful to you after reading it! provide storage operations. Great convenience, while improving work efficiency and ensuring the protection of staff. In order to make the electric truck last longer, its inspection work and maintenance are essential.

Ningbo Staxx Material Handling Equipment Co.,Ltd. has a professional team of engineers and technology professionals.
If you are thinking of having a , then you must be first clear about the purpose, which is driving you to buy this device. Ningbo Staxx Material Handling Equipment Co.,Ltd. offer quality for your needs with complete assurance of ability to serve your purpose.
These hand pallet truck pallet stacker truck are not only useful but also more cost effective than those traditional ones.
To derive the optimal value out of +pallet +truck +manufacturer pallet stacker truck for your home, make sure they're purchased from a globally certified organization to ensure quality in use. Such an offer can be found at Staxx Pallet Truck.
Rewards and discount programs give customers more reason to come back for pallet stacker truck again, especially in the competitive retail and services markets.