Electric pallet truck manufacturers adjust the speed of electric pallet trucks from inside the controller

Nowadays, the importance of enterprise logistics in the trade process is increasingly prominent. How to reduce labor costs has become the primary issue that enterprises must consider. Therefore, electric pallet trucks have become the main force in material handling equipment. The wide application of electric pallet trucks has replaced the problem of manual handling, thereby reducing the cost of large-scale material handling and the cost of manual handling. However, after the large-scale use of electric pallet trucks, it has brought a problem to electric pallet truck manufacturers, that is, some users require electric pallet trucks to adjust the speed.

After purchasing the electric pallet truck, the enterprise may choose to let the manufacturer adjust the speed due to the experience of use, but this approach is not advisable. According to the manufacturer's introduction, the speed of each vehicle is adjusted in accordance with national safety regulations, and the speed of the pallet truck will not be arbitrarily changed due to personal experience.

The speed of the semi-electric pallet truck is adjusted by the internal parameters of the controller and cannot be changed externally. Then adjusting the speed of the semi-electric pallet truck is to see what controller is based on the configuration of the model. The operation should be assisted by professional operators or manufacturers to avoid unnecessary failures.

The lifting speed of the semi-electric pallet truck is the lifting performance requirement of the lifting system: the peak value of the lifting speed with full load is 24m/s. If the speed is greater than this range, it indicates a fault. When the lifting is too slow or the speed is falling too fast, the speed limiting valve installed on the base of the lifting cylinder can be checked. When the stiffness value of the return spring in the spool valve is lower than the design requirements, and the spool valve and the valve hole are too tight, the spool valve will not be fully opened, resulting in a slow rise. If the orifice of the spool valve is too large, it will cause the rate of descent to increase. For example, the throttle hole is blocked by dirt, which may also cause the drop rate to be much lower than the standard value, affecting the working efficiency of the pallet truck. This method is also not allowed, and the fault caused by the blockage needs to be eliminated immediately. If the clearance between the gantry side rollers, the main rollers and the gantry is too small, the lifting speed will be affected due to the increase of friction, and even the fork frame will be stuck under light load and cannot be lowered by its own weight. In this case , the side roller shim set needs to be readjusted for greater backlash. If the main roller is stuck in the channel steel of the gantry and cannot slide down, you can do several full-load lifting actions, and this fault can basically be eliminated for the semi-electric pallet truck.

There is a specialization in the technology industry. Since electric pallet truck manufacturers do not recommend arbitrarily adjusting the speed of electric pallet trucks, it is better for purchasers and users to follow the manufacturer's advice, not because of The individual's sense of use is forced to adjust the speed of the electric pallet truck. In production and work, whether it is an enterprise or should put safety first. Manufacturers should also regularly inspect the electric pallet trucks they produce to ensure the safety of the electric pallet trucks sold when they leave the factory.

.

Staxx Pallet Truck is the leading manufacturer of pallet stacker truck and related products.
We would appreciate your immediate attention to pallet stacker truck.
portable pallet jack pallet stacker truck offer a wide range of pallet trolley and gave the user the choice of semi electric pallet stacker, +pallet +jack +supplier and hand pallet truck price.
Ningbo Staxx Material Handling Equipment Co.,Ltd. clearly knows that people often launch something and love it and want to go on and on about it, but that's too normal and mediocre. There are lots of other competing products, so we need to keep it very, very unique.
Ningbo Staxx Material Handling Equipment Co.,Ltd., a manufacturer of pallet stacker truck, might emphasize less hassle or less wasted time rather than emphasizing reliability or quality.