Electric pallet truck production and sharing Electric pallet trucks cannot speed up for a long time while traveling

With the advent of the era of intelligence, various automation equipment has been applied across the board, such as warehousing and logistics. Warehousing, as the name suggests, is a place for stacking goods. Goods can be big or small. Manual handling of small goods is reluctant, but when large goods arrive, it will be a little difficult. Therefore, an electric truck is used, which greatly reduces the cost rate of manual transportation alone. Of course, although the use of electric trucks has many advantages, it will inevitably encounter some problems and points that need to be paid attention to. Let's talk about it by the electric truck manufacturer.

Particular attention should be paid to immediate battery charging and proper battery maintenance in electric vehicle applications. When charging the battery, pay attention to the way, not only to make the battery fully charged, but also not to cause the battery to be overcharged.

In the actual operation of electric vehicles, try to avoid the application of long-term long-distance acceleration. When the small electric pallet truck manufacturer develops the vehicle and the speed increases, control the accelerator pedal. If the real-time road conditions are good, the vehicle will accelerate again. . The vehicle needs to shift, release the pressure on the accelerator pedal, and lightly step on the brake pedal, so that the kinetic energy of deceleration can be flexibly used. If the vehicle has a regenerative braking effect, the mechanical energy of shifting can be acquired. When the vehicle slides down a slope, it is not necessary to cut off the power supply circuit that pushes the motor, but lightly depress the brake pedal to make the vehicle operate under regenerative braking, and use the mechanical energy of the vehicle to slide down to reduce the calorie consumption of the battery.

During the operation of the vehicle, do not mistake the azimuth power switch of 'forward and backward' as the power switch. Unless it is necessary to slow down urgently, it is not necessary to press the brake pedal all the way immediately. In the whole process of vehicle application, when it is found that the battery capacity is insufficient (according to the electricity meter, the switch power failure indicator light and other alarm systems), the battery should be charged as soon as possible, and the encoder chip of the walking motor should avoid too much battery. Discharge. The CAN (ControlAreaNetwork) Internet is used for communication among the modules of the battery electric pallet truck, and all the electronic components become an overall virtual module, which can exchange operation information in real time and realize real-time control. Under the connection of 2 rapid communication system buses, it is very convenient for each individual action component to store information from other action components.

CAN bus is a serial communication data information communication protocol developed and designed to deal with data transmission among many operation and test equipment in modern vehicles. Axis or light guide, the communication speed can reach 1Mbit/s.

The above is the common problem that Xiaobian introduced to you about the application of electric trucks. I hope you can gain something after reading it. The use of electric pallet trucks facilitates storage and handling of goods, and greatly saves the time and effort of manual handling. However, it also needs to be operated manually, so the operator needs to strictly follow the precautions of the electric pallet truck when using it, so as to avoid problems that affect the handling efficiency.

The average consumer is always looking for ways to save money while finding out solutions, is designed for killing two birds with one stone, providing a perfect solution to pallet stacker truck problems.
Being a performance leader means Ningbo Staxx Material Handling Equipment Co.,Ltd. will achieve operational excellence, industry-leading customer satisfaction and superior financial performance.
It is one of the best products available in the market today. pallet stacker truck is famous product in many oversees market.
pallet jack manufacturers pallet stacker truck is slower than hand pallet jack but has a number of special applications, such as for hand pallet truck manufacturers.