Electric stacker factory direct sales talk about those skills of storage shelf operation

One of the more daunting jobs in the warehouse includes the operation of storage shelves. Today, the direct sales of electric stacker manufacturers talk about the skills and operation process of storage shelf operation, and solve the problems encountered in the operation process for everyone.

Let's take a look at the operation first. First, pay attention to the pallet truck loaded with pallets and then drive into the shelf storage position, and then the driver will start the pallet truck to place the pallet horizontally in the compartment between the columns. The driver needs to take into account the position of the pallet rack beam, and then put the pallet into the rack accurately. Here, the factory direct sales of electric stacker trucks should remind everyone that the lowering pallet cannot have contact with the beam. During this process, the pallet is lowered slowly, placed on the beam, and the load is removed from the pallet jack. When the pallet is in contact with the beam, never slide or pull the pallet on the support member, and then the driver operates to lower the pallet to the ground.

There will be some changes in the storage shelves during the period, such as installation location, beam height, beam layer, unit load, load placement and loading method, and component connection form. The factory direct sales of electric stacker trucks should tell you that if the storage shelves are changed, it is necessary to consider whether the changes of the storage shelves will cause the problem of safe carrying capacity, and the storage shelves should be unloaded during the change.

For storage shelves equipped with back supports, when the position of the beams is changed, the position of the support nodes should be changed, and the horizontal supports between the beams should also be repositioned. Electric stacker manufacturers directly suggest that the changed safety load signs should be replaced after the shelf structure is changed. Storage racks should not be added or altered by welding or bolting unless approved by the storage rack designer.

The placement of the unit load should not exceed the unit load specified by the supplier, and the cargo stacking or pallet storage should not be dropped. When there are multiple storage shelves with different carrying capacity in a storage area, the storage shelves should clearly display their related maximum rated loads and loading methods in different areas. The factory direct sales of electric stacker trucks believe that the layout should be determined according to the actual situation of the goods, and at the same time, it should be ensured that the load layout is consistent with the load layout of the design bearing capacity.

Also, do not make it stand on the shelf when placing the load. The positioning pallet on the support should be symmetrically arranged with a pair of pallet rack beams in the front and rear directions or the drive-in rack beam rails in the left and right directions. When the shelf pallet is supported on the floor, it is recommended to set guide lines on both sides of the aisle to locate the pallet.

Ningbo Staxx Material Handling Equipment Co.,Ltd. promises that we will manufature our products in accordance with the strictest quality standards.
The best for +china +electric +stacker is one that works best for your needs and what you can support in your home. Among Ningbo Staxx Material Handling Equipment Co.,Ltd.'s diversified list of products at different price ranges, you will surely find your one with high quality. make your choice at Staxx Pallet Truck!
The hand pallet truck-type pallet stacker truck is poised to lead the electric stacker market.
We want to be careful and deliberate about developing Staxx Pallet Truck, from the platform we choose, to the way we approach it, to the methods we use.
Ningbo Staxx Material Handling Equipment Co.,Ltd. can promise that pallet stacker truck is one of the best products sold in the worldwide market at present.