Some electric pallet jacks will have electrolyte added, some will not. If not, there is no need to add it. The manufacturer can omit this step at the beginning of setting the electric pallet truck, and how often does it add.
The electric pallet truck with electrolyte can be filled with liquid port. Otherwise, the Changzhou electric pallet truck cannot be filled with liquid. In general, it is enough to add pure water to the battery pallet truck. Separate the rechargeable battery into the lithium battery pack. Drain cover Wuxi electric pallet truck disassembly, inspection and installation, and install it to the water level line near the outer cover.
The aspect ratio of the electrolyte of the electric pallet truck is 10-15mm higher than the pole piece. The rechargeable battery has two red bars. The electrolyte cannot exceed the red bar above. If it is not exceeded, the electrolyte will overflow. The Zhenjiang battery pallet truck cover removed from the battery overflows through a small round hole. We all know that electrolytes conduct electricity. The life of the rechargeable battery flows between the positive and negative poles of the battery. In this case, wipe off the electrolyte or rinse with boiling water.
Battery maintenance is an indispensable link in the daily maintenance process of electric pallet trucks, electric Wuxi battery pallet trucks, and electric electric pallet trucks. The pros and cons of maintaining a battery pallet truck are immediately related to the characteristics of the entire vehicle and its professional capabilities. At this stage, all popular lead-acid batteries in China must improve the battery fluid.
The reason for the abnormal noise of the electric pallet truck.
1. If the electric pallet truck moves abnormally during driving, it is necessary to find a reason through the Wuzi electric pallet truck detection line, so that it can be basically dealt with The pallet truck moves abnormally.
2. If the driving wheel speed of the electric pallet truck is significantly reduced or the drive motor is obviously overloaded due to the maintenance of the electric pallet truck, the battery voltage of the electric pallet truck Too low or pile head contact, possibly because the resistance is too high.
3. Carbon deposits between the plates of the motor commutator will also cause a short circuit between the plates.
4. It may be that the motor brake is improperly adjusted, and the motor of the Wuhu electric pallet truck is working on the brake.
5. The drive head gearbox and bearings are poorly lubricated or the base is stuck, and the motor armature is short-circuited.
Of course, in order to solve these problems of Xuancheng electric pallet truck, it is necessary to check and test where the problem lies, and carry out the electric pallet truck according to the problem. Adjust and repair electric pallet jacks. Electric pallet truck. Pallet truck maintenance personnel need to find out the cause of each detection column in order to fundamentally solve the abnormality of the pallet truck.
Ningbo Staxx Material Handling Equipment Co.,Ltd. also discusses implications for both research and the practice of operations in building systems to help people succeed in both the short and long run.
Ningbo Staxx Material Handling Equipment Co.,Ltd. looks forward for the meeting and the association with your esteemed company.
With this competency, Ningbo Staxx Material Handling Equipment Co.,Ltd. provide high technology and assist customers to create added value and contribute to the development of producing pallet stacker truck.