1. The level difference between the two fork tips exceeds 5mm, the length difference exceeds 10mm, the wear in the length direction of the fork is less than the standard size 40mm, the front end of the fork tip is ground into a twisted shape, the lithium pallet truck
is bent or deformed, or the angle between the fork surface and the fork arm is greater than 90° If these phenomena occur, they should be replaced or repaired. 2. There should be no cracks or open welding in the welding part, and the deformation of the beam should not be greater than 2mm. If the protective frame is deformed and welded, it should be reshaped and re-welded in time. 3. When the shelf and the fork are loaded on the carriage, the upper planes of the two forks should be kept in the same plane, and there should be no height or dislocation. 4. Check whether there are cracks or open welding at the upper and lower iron welds of the fork. If there are defects, repair them in time. 5. For the force-bearing part of the fork arm and the fork face, it needs to be inspected for flaw detection. When cracks appear, they should be dealt with in time. 6. Install the shelf and forks, and the thickness and length of the selected forks should be roughly the same. 7. The standard for the opening size of the upper and lower irons of the forks of the electric stacker is 27mm, and the use limit is 29mm. If this limit is exceeded, it should be repaired in time.
Whenever you grab your remote and turn on the TV, there are numerous ads promoting pallet stacker truck
and offering for hand pallet truck price extracts, which are said to boost +pallet +truck +manufacturer.
Ningbo Staxx Material Handling Equipment Co.,Ltd. is committed to supplying the consumer and our customers with the finest, high-quality products and to leading the industry in pallet stacker truck motorized pallet jack.
Rewards and discount programs give customers more reason to come back for pallet stacker truck again, especially in the competitive retail and services markets.