It is too dangerous to use a manual stacker like this

As a small storage forklift for handling stacked goods, the manual stacker is small in size, easy to operate and low in cost. It is suitable for the stacking of short-distance light goods. Manual forklifts have the advantages of manual forklifts, but they also need to be operated in strict accordance with the operating specifications of manual stackers.

What are the taboos in the use of manual stackers?

1. There is no detailed inspection of the car body, oil tank, etc. before use, resulting in the problem that the goods may not be lifted up during use, or cannot be lowered after being raised. This is caused by the relief valve being adjusted too loosely or too tightly.

2. In the process of using a manual stacker, we need to pay attention to the order of the forklift when lifting the goods. For example, after fork-lifting the pallet loaded with goods, it will move a certain distance. The height of the fork should not be too high. The distance from the ground does not hinder the movement of the forklift. If the lift is too high, the center of gravity of the forklift will move upward, and the chassis will be unstable and easy to tilt, which may cause serious casualties.

When using a manual stacker to stack goods, if you do not pay attention to increasing the load ratio, overloading will cause the vehicle to tip over. Therefore, we must pay attention to the load increase ratio. Generally, the standard increase of the manual stacker is 1.6 meters. If we want to stack goods to 1.6 meters, then we need to appropriately reduce the load on the basis of the rated load, just to ensure the service life and safety of the vehicle.

It is also a dangerous thing to use an improper pallet. The pallet is too large and the size of the fork of the manual stacker does not match, which will cause the center of gravity of the cargo to shift, and eventually tip over and cause an accident. Generally, electric forklift manufacturers will mention that the pallets used by manual stackers are nine-legged or Sichuan-shaped pallets when explaining the usage conditions, and the size of the pallets also needs to be asked clearly.