Knowledge about the maintenance of electric pallet trucks

As the leader in handling equipment in the modern logistics and warehousing industry, electric pallet trucks provide a lot of convenience for everyone's work, not only improve work efficiency, but also ensure the safety of operators, making work easier and more enjoyable. According to statistics, people who know how to take care of electric pallet trucks can save thousands of yuan every year. Are you such a person?

In order to facilitate the service guarantee of the electric pallet truck for a longer period of time, you must study its maintenance standards seriously!

1. About the battery of electric pallet truck

It is forbidden to overcharge or overdischarge the battery, and charge it in a balanced manner. The newly bought electric pallet truck should be fully charged when it is charged for the first time, and the battery should be charged according to your operating frequency in a scheduled manner. When charging, do not place conductive objects on the battery, and keep the surface of the battery clean and dry.

It is best to check the battery voltage, electrolyte density, and temperature every week, and make a total measurement every month. Under normal circumstances, the battery should be placed in a clean, dry, and ventilated place, and the battery cannot be exposed to sunlight, or the battery can be turned upside down, and the battery cannot be hit or stressed. After using the handling equipment at ordinary times, it is necessary to clean up the mud, sand and garbage on the vehicle, and check whether the power cord is intact and undamaged.

2. About the daily maintenance of electric pallet trucks

The hydraulic press of the electric pallet truck needs to be maintained every six months to check whether the hydraulic cylinder is leaking, whether there are any problems with the joints, rubber hoses, etc., and whether the electrical insulation layer is normal.

When getting out of the car, check whether there are any obstacles around. If the handling equipment cannot collide with obstacles, if an accident occurs, and the vehicle is out of control, quickly press the power switch to disconnect the power. When the vehicle is started, the operator checks whether the handbrake is in the position where it should be. If the handbrake is not put down, the vehicle will be damaged and the vehicle will be scrapped if it is serious.

When the vehicle cannot be started, it is necessary to turn off the forward and reverse switch and turn it on again before it can be started. When the vehicle is not starting, do not slam on the accelerator pedal, as this will increase the risk. Before leaving the vehicle, the operator should pull up the hand brake and pull up the main switch of the power supply, and then leave the vehicle after taking out the key.

The above are all the basic maintenance knowledge of electric pallet trucks, and the details determine the cost. Only by persisting day and night will you see the effect of maintenance.