Maintenance and maintenance method of rail type aerial work elevator

The high-altitude operation electric pallet lift truck is constantly working for us every day, and a certain degree of wear will occur in the process. If we do not maintain it, it will reduce the service life of the equipment and cause economic losses. Therefore, it is often necessary to protect it and maintain it. of. The protection and maintenance of rail-type aerial work elevators: 1. The brakes of various organizations should be checked and adjusted frequently between the brake shoes and the brake wheel to ensure sensitivity and reliability. There should be no dirt on the friction surface. If there is dirt, it is necessary to wash it off with gasoline or thinner. 2. The smoothing of the gearbox, gearbox, external meshing gear and other parts and the hydraulic oil are carried out in accordance with the requirements in the smooth table. 3. Pay attention to check whether there are broken wires and loose strands in the wire ropes. If it exceeds the relevant rules, it is necessary to replace it immediately. The protection and maintenance of the steel wire rope should be strictly carried out in accordance with the rules. 4. Check the connection status of each part frequently, and tighten it if there is any looseness. The body connecting bolts should be checked for tightness when the body is under pressure (the rotating arm can be used to form the pressure condition). All connecting shafts must have cotter pins, and they need to be fully opened. 5. Frequently check whether the organization is working normally and whether there is noise. If something is found, it is necessary to clean it up in time. 6. When equipment, disassembling and adjusting the reversal organization, pay attention to ensure that the centerline of the reversal organization reducer is parallel to the centerline of the gear, the meshing surface is not less than 70%, and the meshing gap should be appropriate. 7. Always check all wires and cables for damage. Bandage and replace the damaged part in time. 8. When the motor is overheated, park the car in time and keep running after removing the fault. The motor bearing should be smooth. 9. The contact surface of each part of the brush should be kept clean, and the pressure of the brush should be adjusted so that the contact area is not less than 50%. 10. All control boxes, distribution boxes, etc. are always kept clean, and dust on electrical equipment is cleaned up in time. 11. The contact opening and closing of the travel switch of each safety equipment must be reliable, and the contact crater should be polished in time.
is a modern pallet stacker truck widely used in hydraulic hand pallet truck industry. It also enhances the quality hand pallet truck manufacturers value of the products.
Ningbo Staxx Material Handling Equipment Co.,Ltd. also values the time, skills, and expert opinions of our staff. We are committed to providing fair and living wages, reasonable, structured work schedules, and clear duties and spheres of rights and responsibilities for each team member.
Overwhelming customers with too much information or the slew of benefits pallet stacker truck provides–even if they're all valid–is a surefire way to lose their attention.