Manual hydraulic truck wheel selection and replacement steps

Manual hydraulic truck wheel purchase

Workers at the cargo station use manual hydraulic trucks to load and unload goods, which is labor-saving and efficient. Manual pallet truck is a common cargo handling tool, which can quickly carry out cargo handling and loading and unloading operations through human manipulation.

Due to the frequent manual hydraulic trucks in daily work, the load-bearing wheels are worn too seriously. I want to buy a new set of wheels to replace them, and ask if I can replace them myself. Because the structure of the manual hydraulic truck is relatively simple, it can be completely replaced by itself. But pay attention to the following points:

First of all, when purchasing wheels, you should pay attention to the specifications, dimensions and materials. Different tonnage trucks have different load-bearing wheels. You can inform the customer service of your own truck specifications. The material of the caster wheel of the manual truck is nylon wheel and polyurethane wheel, which can be selected according to your own environment.

When replacing, first find a striker with strong hardness, punch out the hollow shaft (5 cm) of the wheel and the axle, then knock out the small axle, and replace the wheel and bearing together. The big wheel is relatively simple. Generally, the big wheel can be knocked out by disassembling the circlip with the circlip pliers. If the load-bearing wheel is severely rusted, it must be ground with a grinder.

Manual pallet truck wheel replacement steps:

Use steel nails to knock out the pins first, then remove the wheels in sequence, then install them, and then install the pins.

For the load-bearing wheel, find a strong striker, punch out the hollow pin (5 cm) of the wheel and the axle, and then knock out the small axle, and replace the wheel and bearing together. The big wheel is relatively simple. Generally, the big wheel can be knocked out by disassembling the circlip with the circlip pliers. If the load-bearing wheel is severely rusted, it must be ground with a grinder.

This is an global standard which acts as a form of promise that Ningbo Staxx Material Handling Equipment Co.,Ltd. manufatures according to the finest quality standards.
Ningbo Staxx Material Handling Equipment Co.,Ltd. are dedicated to providing excellent underwriting and loss control advice up front, and to ensuring superior customer service through the life of the policy.
You will have a powered pallet truck that looks staxx pallet truck all the time, Because your is handling with it.
Ningbo Staxx Material Handling Equipment Co.,Ltd. is a new company that provides expertise in search marketing solutions for business on a worldwide basis.
We are proud to be a part of helping you to make healthy choices to last a lifetime. Check out our website to see all pallet jack manufacturers pallet stacker truck products we offer at Staxx Pallet Truck. If you want to start that road to be better, contact us today!