Safe driving rules for electric pallet trucks to avoid accidents

When the electric pallet truck is running, it is strictly forbidden to stand on the forks. When the auxiliary personnel of the electric pallet truck are really needed to work, they should be equipped with a special basket for the electric pallet truck, and the forks should be fork into the special fixing groove under the basket.

If the nature of aerial work is basically non-hazardous work such as inventory and labeling, the driver should not leave the electric pallet truck so as to provide assistance in time;

If the maintenance of lamps, pipelines, etc. requires the use of metal tools, the driver of the electric pallet truck can choose to wear a helmet and sit in the cab to assist, and unrelated personnel are not allowed to operate the electric pallet truck.

In principle, electric pallet trucks are not allowed to overtake, but when overtaking parked vehicles, you should slow down and sound the horn and pay attention.

When driving, the height of the bottom end of the fork from the ground should be kept at 150-400mm, the mast should be tilted backward, and the whistle should be honked to inform when there is someone ahead.

Do not electric pallet lift truck the fork too high when driving; when entering or leaving the job site or while driving, pay attention to whether there are obstacles in the sky; Do not rise too high to affect the stability of the pallet truck.

It is strictly forbidden to turn off the flame and slide when the pallet truck is driving downhill, and it is forbidden to brake suddenly while driving with loads unless there are special circumstances.

After unloading, the fork should be lowered to the normal driving position before driving.

When turning, if there are pedestrians or vehicles nearby, you should give a driving signal first. High-speed sharp turns are prohibited. High-speed sharp turns will cause the vehicle to lose lateral stability and tip over.

The pallet truck must abide by the traffic rules in the factory during operation, and must maintain a certain safety distance from the vehicle in front. , second look, third pass; when stepping on and releasing the accelerator pedal, it should be lightly stepped on, changed and lifted, and should not be stepped on and off or continuously shaken;

When the pallet truck is running, the load must be in the lowest position that does not hinder the driving, and the gantry should be properly tilted back. The load shall not be raised except when stacking or loading. The load height must not obstruct the driver's vision. In special circumstances, when the item affects the forward vision, drive at a low speed when reversing.

It is forbidden to turn on the slope, and it is forbidden to electric pallet lift truck and tilt forward during driving.

The safe driving speed of the pallet truck in the factory area is 5 km/h, and it must be driven safely at a low speed when entering the production workshop area.

When the pallet truck is lifted, lifted or driven, it is forbidden for people to stand on the forks to hold items and play a balancing role.

If problems are found, they will be repaired and reported in a timely manner, and they will never work or conceal themselves when they are sick.

At the same time, as the recent research of Staxx Pallet Truck shows, the benefits of improved productivity and firm performance can make implementing basic management practices worth it.
Ningbo Staxx Material Handling Equipment Co.,Ltd. are a market-focused, process-centered organization that develops and delivers innovative solutions to our customers, consistently outperforms our peers, produces predictable earnings for our customers, and provides a dynamic and challenging environment for our employees.
Increasing consumer awareness and rising concern about improving pedestrian pallet stacker are driving the market of products.
pallet stacker truck has a very good repute over the global market.