Semi-electric stacker manufacturers explain common faults and solutions of semi-electric stackers

Semi-electric stacker is a popular industrial vehicle in recent years. It is widely used in warehouses, factories and other handling operations such as loading and unloading, stacking and transporting goods. Semi-electric stacker manufacturers say that people often ask which is the best semi-electric stacker. In fact, we should pay more attention to the quality of the products. Today we provide you with some common faults and solutions for semi-electric stackers.

1. The speed of the driving wheel of the stacker is significantly reduced or the drive motor is seriously overloaded
Cause: The manufacturer of the semi-electric stacker thinks that the battery voltage is too low or the pile head is in contact The resistance is too large; the carbon deposition between the motor commutator pieces causes the short circuit between the pieces; the motor brake is not adjusted properly and the motor runs with braking; the drive head gearbox and bearing lack lubrication or the base is blocked; the motor armature is short-circuited.
Solution: Check the battery terminal voltage or clean the pile head when the stacker is loaded; clean the commutator; adjust the brake clearance; check and clean and refill the lubricating oil to remove the jamming phenomenon; replace the new motor.

2. The stacker is weak or unable to lift
Causes: excessive wear of gear pump and pump electric pallet lift truck; improper high pressure of the relief valve in the reversing valve; oil pressure Oil leakage from pipeline; excessive temperature of hydraulic oil; jamming phenomenon of gantry carriage; low speed of oil pump motor.
Solution: replace the worn or gear pump, re-adjust, check and repair; replace the unqualified hydraulic oil and check the cause of the oil temperature rise, check and adjust; check the motor and troubleshoot.

3. It is difficult to automatically tilt the stacker gantry or the movement is not smooth
Cause: The wall of the tilting cylinder and the sealing ring are excessively worn; Stem spring failure; piston stuck to cylinder wall or piston rod bent; excessive build-up in tilt cylinder or over-tightened seals.
Solution: replace the O-ring or oil cylinder; replace the qualified spring; replace the damaged parts; clean and adjust.

The above are the reasons and solutions for several common faults of semi-electric stackers listed by semi-electric stacker manufacturers. I hope it will help you when you use your vehicles in ordinary times. Thank you for your attention and support.

Competitiveness policy of Ningbo Staxx Material Handling Equipment Co.,Ltd. is about existing clusters as a platform for upgrading microeconomic fundamentals, where structural policies aim to change the industrial composition of an economy more directly.
If you are looking for a reputable pallet stacker truck +china +electric +stacker, you are on the lucky side as we are among the leading supplier in China. Visit the given links Staxx Pallet Truck to know more.
To derive the optimal value out of powered pallet truck pallet stacker truck for your home, make sure they're purchased from a globally certified organization to ensure quality in use. Such an offer can be found at Staxx Pallet Truck.
Getting pallet stacker truck from an idea to production is a complex process. It involves significant research, time, planning and patience. But with the right information, the right resources and the right product, it's possible.