Some faults and maintenance of electro-hydraulic platform vehicles

There are many hidden dangers in the use of electro-hydraulic platform vehicles, which are not easy to find in daily maintenance. If these failures of the electrohydraulic platform truck are not dealt with, it will eventually lead to the paralysis of the electrohydraulic platform truck. or worse consequences. The following issues are details that are often overlooked by most operational users:

1. The button is out of order, and the operation of the whole electro-hydraulic platform vehicle, such as rising, falling, and pausing, is controlled by the button. If there are occasional key failures during operation, you should pay attention to this phenomenon. This phenomenon may be a short circuit in the electrohydraulic platform vehicle or the electrical system is about to fail. At this time, it is necessary to check carefully in time, so as not to affect the operation of the electric hydraulic platform truck in the future.

2. The electro-hydraulic platform truck cannot descend to the natural height, resulting in failure. The reason is:

① Deformation of the main frame of the electro-hydraulic platform vehicle;

② Too much hydraulic oil injected into the electro-hydraulic platform truck;

③ There are sundries between the scissor bars of the electro-hydraulic platform truck.

3. The motor of the electro-hydraulic platform car is noisy, and occasionally it will be accompanied by motor heating or peculiar smell. The reasons for such problems are:

① The electro-hydraulic platform truck is overloaded. If there is an overload problem, uninstall it in time.

②The voltage of the electro-hydraulic platform vehicle is unstable, check whether there is a problem with the circuit.

③If the motor is not well sealed or the coil is burnt out, it should be tightly sealed or the coil should be replaced in time.

Timely correction of small problems can avoid major failures, so that the electro-hydraulic platform truck can run stably for a long time. Aiming at the potential failures of electro-hydraulic platform vehicles, timely detection and elimination of problems can reduce the occurrence of many failures. Timely detection of hidden dangers and downtime elimination is the key, and we usually need to take more preventive measures.