Specification for safe operation of electric stacker

Specification for safe operation of electric stacker

1. Installation and debugging

Before starting the machine, check that all parts are in good condition, stack the cart, and check the performance of all operating elements and safety devices.

The mobile lithium pallet truck can only have the current generated by the battery, and must not use the rectified alternating current to damage the electronic components.

Controller:

(1) Slow travel
(2) Main power switch
(3) Emergency reverse button
(4) Fork up button
(5) Electric brake switch lock
(6) Electric lock
(7) Horn
(8) Fork drop button
(9) Accelerator

2. Exercise

Before moving an all-electric stacker, check that the brakes and batteries are fully charged. Electric stacker. Open the electric lock, move the operating rudder to its motion device, slowly turn the accelerator, and move to the corresponding work area. Turn the accelerator forward to drive the electric stacker forward, turn the accelerator backward to drive backward, and the accelerator returns to the middle position to stop. Start, stop or change movements slowly, as sudden movements can be dangerous. When the stacker is walking, the load should be in a low position, the height of the fork from the ground should not exceed 300mm, and the narrow passage or curved road should be slowed down.

3. Stacking

(1) Slowly back your legs to ensure that the tray is stably resting on the shelf.
(2) Raise the load until it is above the shelf.
(3) Slowly move the stacker forward, stop when the load is above the shelf, lower the fork of the semi-electric stacker to exit from the tray, and make sure that the tea is safely placed, do not add force when withdrawing. on the shelf below.
(4) With the load at a low position, be careful to approach the shelf.
(5) Lower the fork back to the moving position.
(6) Make sure that the front legs of the stacker can move freely under the tray or shelf.

4. Uninstall:

(1) Raise the fork to the required height, make sure that the fork can easily enter under the pallet, and slowly approach the pallet to be unloaded until the load is safely placed on the fork.
(2) Raise the forks until the pallet is lifted from the shelf.
(3) Slowly lower the load and make sure that the fork will not encounter obstacles during the descent.
(4) Lower the fork orthogonally to the shelf and then into its bottom.
(5) Slowly move back and exit the channel.
(6) The forks come out of the bottom legs of the shelf.

5. Transportation

For transportation, electric stacker. Two lifting points are given, indicated by the 'G' type designation, while the forklift weight is indicated by the 'A' type designation.

Whenever the question of pallet stacker truck staxx pallet truck is raised, one comes across the term ''.
Staxx Pallet Truck is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.
Ningbo Staxx Material Handling Equipment Co.,Ltd. needs to ensure we're resolving customer issues as quickly as possible. By doing so, it leads to positive customer experiences and brand loyalty.
You can get more information from Staxx Pallet Truck for on sale. welcome to visit us and send your inquiry!
Ningbo Staxx Material Handling Equipment Co.,Ltd. has never conceded on the quality and the services of the products which provided to the customer.