Specification for the use of electric stackers in enterprises

1. Purpose: To enable the warehouse keeper to understand the characteristics and structure of the all-electric stacker, and master the operation process, precautions, and normal maintenance of the all-electric stacker.

2. Operation Method: The warehouse keeper understands that the stacker must be in the open field. After a basic understanding, it can be used on the first and second floors of the shelf. After one month of understanding, the third, fourth, and fifth layer of goods can be manipulated.

1. Initiation of the electric stacker: check to ensure that the battery is fully charged and the indicator light is on. Insert the key into the electric lock, turn it clockwise, and lift the emergency stop switch to initiate the stacker.

2. The forward/evacuation of the electric stacker: pull the control handle of the stacker to its own wall, and swing downward for an improper viewpoint. (Leave the vertical position but not press it to the lowest position) , And then use the thumb to turn the two knob switches: if this switch is turned forward, the stacker will move forward, and if this switch is turned backward, the stacker will evacuate. The forward/evacuated rate is based on the turning point of view of the knob switch It is controlled by the size. When starting or when the surrounding space is small, in order to ensure safety, the turning point of view should be controlled to be smaller to ease the forward speed. There is a low-speed button on the handle, and press it to limit the low-speed forward.

3. Lifting and falling of the fork of the stacker: press the button with the electric pallet lift truck mark on the control handle with your finger, and the fork will rise; press the button with the drop mark, the fork will fall; after releasing it, it will start to rise and fall immediately.

4. Finally, the belly is safe: When the stacker is evacuated, if the body collides with the red belly switch, the stacker will start immediately and stop for a short distance in the opposite direction to the forward target. This is important for Prevent your body from being hurt by kneading.

5. Conventional parking of the stacker: When you need the stacker to bump and stop, release your thumb and the torsion switch will automatically reset. At this time, it will be controlled. The device generates a reverse current, and the stacker will stop for a short distance before bumping to a stop.

6. Vehicle charging: When the electricity meter emits a flashing signal, that is, when the battery is exhausted, it alarms.

, It should be charged in real time. When charging, first turn off the electric lock and insert the key from the electric lock.

Three, control process, load process:

1. Move closer to the front of the heavy object;

2. Raise the fork to an improper height below the bottom of the heavy object;

3. Move the stacker forward to make the fork Reach under the heavy object;

4. the fork until the heavy object is loaded;

5. Move the stacker and the heavy object backwards until the fork is equipped Landing space

6. Slowly drop the heavy object to an improper height.

Loading process:

1. Move the stacker with heavy objects Near the front of the shelf;

2. the heavy object to an improper height;

3. Move the stacker forward to the improper position;

4 , Slowly lower the heavy objects, so that the bottom surface of the heavy object tray sits on the shelf;

5. Slowly move the stacker with its fork out of the shelf.

Nowadays, the adoption of pallet stacker truck in +china +electric +stacker industry is quite common.
Crazy about products? Ningbo Staxx Material Handling Equipment Co.,Ltd. is the place you must shop at, do visit Staxx Pallet Stackers to check out our latest collections!
electric stacker needs not be tedious anymore with the application of . So getting the right pallet stacker truck can drastically promote battery operated pallet stacker.
We create a group of experts to promote the quality standard and innovative technology of pallet stacker truck.