Specifications for the safe use of scissor aerial work platforms

Now more and more aerial work platforms are recognized and widely used in China. While it brings convenience to our aerial work, we have to face some safety hazards, such as scissor-type aerial work platforms on the construction site. The main points are to avoid overturning, scratching, electric shock and other aspects. In the daily use process, the main points should also be done well, such as the inspection before use, the monitoring during use, and the maintenance after use. The following points should be controlled during the use process: 1. Scissor aerial platform stacker operators It is necessary to participate in the use of anti-fall protection and lithium pallet truck platform training to start operating the equipment. 2. There should be a label on the body of the scissor-type aerial platform stacker, indicating the following: limit of lifting speed, rated load capacity, maximum lifting height, manufacturer's name and production date, etc. 3. The installed lifting platform shall be inspected by the on-site safety engineer before being put into use, and be put into use only after hanging the permission card. 4. It is necessary for the operators to check the lifting platform and fill in the checklist before using it every day. 5. The user must operate and use in accordance with the operating rules of the electric pallet lift truck truck. 6. The work area must be on open and flat ground, and it is not allowed to operate on uneven ground. 7. The channel outriggers must be completely opened and supported firmly. 8. When the channel is in the rising starting position, the operating personnel cannot leave. 9. It is necessary for personnel using scissor-type aerial work platforms to wear full-body safety belts. During the lifting process, attach the safety belt to the channel, the basket or the attachment point made by the manufacturer. When the scissor-type aerial platform stacker is raised to the working height, the safety belt is no longer tied to the channel, and should be tied to a secure hanging point of other structures. If there is no secure hanging point, a wire rope should be used to hang on the steel beam. Or on the concrete beam, and fasten the seat belt to the wire rope loop. 10. The channel operation area must be protected with warning tapes, warning signs, and full-time guardians.
Look at the trends, both economic and consumer, for indications on your Ningbo Staxx Material Handling Equipment Co.,Ltd.'s staying power.
Get cost effective and professional pallet jack manufacturers advice for your solution at Staxx Pallet Stackers. Ningbo Staxx Material Handling Equipment Co.,Ltd. expert is your first choice!
Ningbo Staxx Material Handling Equipment Co.,Ltd. have found that nurturing relationships with clients by welcoming them to our factory can be valuable to all parties.
With a few simple , and a little bit of hand pallet truck price, you to can handle hand pallet truck on your own.