Storage pallet truck manufacturer's pallet truck battery structure

The electric pallet truck of the storage pallet truck manufacturer is a traction pallet truck with battery as the driving force. The battery has become an important part of the pallet truck, and its driving is indispensable for driving and loading. So what is the composition of the pallet truck battery? Next, let's take a look at the relevant content about the battery structure of the pallet truck.

The working principle of the pallet truck battery of the storage pallet truck manufacturer is similar to that of the start-up battery, but in terms of structure, most of the positive plates of the power battery use The tubular plate is used, and the negative plate is a paste-coated plate. With the protection of the outer glass fiber, the active material in the tube is not easy to fall off, so the life of the tube plate is relatively long. The power battery is bolted or welded to form a battery pack with no capacity. The combined structure of the pallet truck battery is only the battery itself. How to use it correctly is the key point, and the later maintenance must be followed. The battery life of the pallet truck is guaranteed.

The pallet truck battery of the warehouse pallet truck manufacturer is composed of 2V monomers in series, and the mixed current drives the pallet truck to drive. The initial charging takes place in two stages. First, use the initial charging current to charge the electrolyte to release bubbles, and the single-cell voltage rises to 2.3~2.4V, then reduce the current to 1/2 of the initial charging current, continue to charge into the electrolyte, and release violent bubbles. Continuous 3H stable.

The total charging time is about 45~65H. During the charging process, the temperature of the electrolyte should always be measured by halving the current, stopping charging or cooling, and the temperature should be controlled at 35~ 40 degrees, when the initial charging is completed, if the specific gravity of the electrolyte is out of specification, the manufacturer of the storage pallet truck recommends using distilled water or an electrolyte with a specific gravity of 1.4 for adjustment. After adjustment, charge for 2H until the specific gravity meets the requirements.

In addition, the battery of the pallet truck manufacturer should not be over-discharged. Over-charging or discharging will affect the service life of the battery. After the new battery is charged for the first time, it should be discharged in a cycle, discharge at a discharge rate of 20HH, and then supplement the charging current to make it sufficient. After one charge and discharge cycle, if the capacity of the battery is still lower than 90% of the rated capacity, it must be done again. charge and discharge cycles.

The above is the relevant content of the battery structure of the storage pallet truck manufacturer. If you have any questions, please call us and we will answer your questions with professionals.

Finding a reliable solution for the pallet stacker truck electric stacker not only supports operation of the entire system but also enhance the beauty of your workplace.
Ningbo Staxx Material Handling Equipment Co.,Ltd.’s core aim is to afford high-quality products with the concept of manufacturing technology.
Ningbo Staxx Material Handling Equipment Co.,Ltd. harnesses science and technology to create products that support safer and healthier living and that enhance the overall quality of life.
It is one of the best products available in the market today. pallet stacker truck is famous product in many oversees market.