Warehousing pallet truck manufacturers customize and summarize common problems of lifting platforms

The hydraulic lifting platform customized by the warehouse pallet truck manufacturer must undergo formal inspection and debugging before leaving the factory, and can only be put on the market after various technical indicators reach the standard. Connect the power supply when in use, the hydraulic, electrical and other systems do not need to be adjusted, and are placed on a solid and flat ground during use to avoid overturning. This is just one of the problems. For specific problems, the manufacturers of storage pallet trucks will customize them to analyze them with you.

If the workbench does not work, stop it immediately for inspection; when the working pressure of the electric lift is too high or abnormal sound is generated, immediately shut down and check to avoid more serious damage to the machine; Check the axle pins regularly every month. If the axle pins or screws are found to be loose, the pallet truck manufacturer reminds you to lock them in time to prevent the axle pins from falling off, causing personal injury and property damage. The hydraulic oil should be kept clean and replaced every six months; during maintenance and cleaning of the lift, the safety prop must be supported.

Next, the manufacturer of the storage pallet truck will discuss some common problems in detail. I hope you will remember it carefully, because it may be used in the future use of the equipment:

< /p>

The inability of the lift to lift or the lifting force is a very troublesome thing. This may be because the pressure adjustment of the relief valve does not meet the requirements, and it can be adjusted to the standard pressure value; it may also be because the oil cylinder leaks. At this time, we need to check the components and replace the oil cylinder if necessary; if it is found that the reversing valve is stuck Tight or internal leakage, replace the valve assembly. If the oil level is too low and the oil inlet filter is blocked, then you need to clean the oil filter.

When the electric pallet lift truck table is maintained, the staff must hang the electric pallet lift truck when entering the lift table to prevent the lift table from falling suddenly and causing danger. Check the rollers, intermediate shafts, bearings, cylinder pins, bearings and other components once a month, as well as the lubricity and wear of the boom hinge shaft and bearings; also check the hydraulic oil quality and oil level. When the lithium pallet truck platform is raised, the hydraulic oil level should be 40-50mm higher than the bottom of the oil tank. When the oil color of the hydraulic oil becomes dark, the oil is sticky, and there is grit in the oil, etc. Change hydraulic oil.

It is recommended to check the hydraulic and piping connection parts once a year. If the pipe is damaged, replace it immediately, and tighten the pipe joint when the connection part is loose. Remove and disassemble the lowering valve, blow the valve core with compressed air and re-install it. Drain the hydraulic oil in the oil tank, open the oil tank and take out the oil suction filter, clean it and install it in its original position, and then fill it with new oil.

Clouds of semi electric pallet stacker failures surround the world of hand pallet stacker in particular, simply because people don’t pay as much attention to the pallet stacker truck as they should do.
Visit Ningbo Staxx Material Handling Equipment Co.,Ltd. for the best in supplies: Staxx Pallet Truck.
pallet jack manufacturers pallet stacker truck is characterized by various advantages, such as portable pallet jack, electric stacker and +pallet +jack +supplier, which is not the case with other pallet stacker truck.
So, what's a manufacturer to do? Familiarize ourselves with producing pallet stacker truck in various technologies.
Overwhelming customers with too much information or the slew of benefits pallet stacker truck provides–even if they're all valid–is a surefire way to lose their attention.