Warehousing pallet truck manufacturers describe the antifreeze skills of electric pallet truck batteries

The weather is getting warmer, but the temperature in some areas is still below zero. Therefore, for these friends, the antifreeze work of pallet trucks still cannot relax their vigilance. In particular, the battery of the electric pallet truck should do a series of antifreeze work to ensure that the equipment can be used without obstacles, ensure the work efficiency, and also prolong the service life of the equipment, so as to achieve the purpose of saving operating costs. Next, the storage pallet truck manufacturer will take you to learn some tips on battery antifreeze.

1. Pay attention to the battery warm-up work in cold weather

Speaking of the battery's antifreeze, we have to say the battery's warm-keeping work. The battery is the core power component of the electric pallet truck, and the performance of the battery is closely related to the temperature. The manufacturer of the storage pallet truck recommends keeping the working environment temperature of the battery at about 25°C. When the temperature is low in winter, friends who have the conditions must store the electric pallet truck indoors, and do enough work to keep the equipment warm and antifreeze.

2. Immediately after use, the battery is fully charged

When the weather is cold, once it is found that the power of the electric pallet truck is exhausted, it should be charged in time, and it must be avoided to use it without power. If possible, the warehouse pallet truck manufacturer reminds everyone to keep the battery of the electric pallet truck fully charged, so as to avoid running out of electricity halfway through the work, and it will not affect your work progress and cause unnecessary trouble. When charging, disconnect the charging circuit and the chopper to avoid affecting the charging. In addition, the overvoltage generated by the charger will damage the chopper, and the wiring from the battery to the electronic control should be arranged in parallel and as short as possible.

3. The battery should be waterproof and moisture-proof

When the electric pallet truck enters the room from the outside, the surface of the battery suddenly comes to the warm place with cold air. When indoors, frost may form on the surface. Therefore, warehouse pallet truck manufacturers should do a good job of waterproofing and moisture-proofing the battery to prevent battery damage. In addition, regularly clean the dust inside the DC motor, check whether the carbon brushes and springs are normal. The battery is the core of the electric pallet truck, so it is necessary to add distilled water in a timely manner.

4. Riding assistance to prolong battery life

When the electric pallet truck is on up and down slopes, the storage pallet truck manufacturer recommends reducing acceleration or deceleration, and try to avoid frequent braking and sudden acceleration; When encountering obstacles, slow down and brake in advance to reduce the burden on the battery.

The above is the content related to the battery antifreeze skills of electric pallet trucks brought by storage pallet truck manufacturers, I hope it can be helpful to everyone!

pallet stacker truck are all following the most compatible manufacturing regulations.
Ningbo Staxx Material Handling Equipment Co.,Ltd.’s mission is to provide high quality care and services to our members and to be profitable in the process.
Among improvements to pallet stacker truck, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.
Ningbo Staxx Material Handling Equipment Co.,Ltd. can promise you that we never conceded on the quality standards of our products.