Warehousing pallet truck manufacturers talk about why the water temperature of the pallet truck is too high

When we use electric pallet trucks on a daily basis, we will inevitably encounter this or that problem, including the problem of the high water temperature of the pallet truck. Structurally, the pallet truck cooling mechanism of the warehouse pallet truck manufacturer company is generally composed of cooling fans, radiators, thermostats and other components. The engine drives the cooling fan, the fan speed is consistent with the engine speed, and the thermostat adjusts the cooling water temperature. This structure is convenient for maintenance and low in cost.

In the inspection of the thermostat, the current thermostat used in the engine is mainly a wax thermostat, which is mainly to dynamically control the cooling at different temperatures The level of water temperature. For checking the quality of the thermostat without dismantling, the warehouse pallet truck manufacturer company should tell you that this is mainly judged by the temperature difference between the radiator inlet pipe and the outlet pipe. After the engine cold engine is started, there is an obvious temperature difference when the inlet and outlet pipes are touched by hand. After working for a period of time, the temperature difference is obviously reduced, and there is no obvious temperature difference when the temperature is touched by hand during normal operation.

The fork radiator is located at the rear of the vehicle. The chassis of the pallet truck is low. If the working environment is poor, some sundries and dust will easily accumulate on the surface of the radiator. If it is not cleaned in time, it will seriously affect the heat dissipation. Therefore, we recommend that the radiator should be carefully cleaned after using the equipment, and the high-pressure water gun should not be used as much as possible, so as to avoid flushing the wall of the tube and affecting the heat dissipation effect. At the same time, hard water should not be used to prevent scale formation and lead to insufficient cooling water.

In the inspection of the pump, the power source of continuous circulation in the cooling system comes from the water pump. Therefore, the storage pallet truck manufacturer company believes that whether the water pump can establish sufficient pressure is the key to the normal operation of the cooling system. When adding cooling water, as the engine speed increases, the cooling liquid level drops significantly to indicate that the water pump is working normally. On the contrary, the water pump and impeller may become loose and the cooling water cannot circulate.

While checking the cooling fan, we recommend that you press down the middle of the belt with your fingers, and the lower deflection is 11-13mm, which is normal. The fan blades cannot be installed backwards to ensure that the fan guard is complete and effective.

The above is the content brought by the storage pallet truck manufacturer company, I hope it can be helpful to you, and we also welcome you to call. Although the epidemic is currently, we are isolating the epidemic, not isolating love!

Ningbo Staxx Material Handling Equipment Co.,Ltd. specializes in undertaking corporate offers to cater the needs of different companies.
Review Ningbo Staxx Material Handling Equipment Co.,Ltd.'s progress at regular intervals, so we can continue with the strategies that work well and change or eliminate the ones that don't give the results we are looking for.
pallet stacker truck are raising the stakes of social marketing, but they also ease the sales process by providing ways for pallet jack for sale to effectively interact with customers.