What are the common faults of electric pallet trucks?

Common failures of electric pallet trucks:

Electric lock switch or power switch failure Main contactor failure: main contactor power failure; main contactor contact is poor or inflexible. The fuse is blown. The fuse is damaged. The line at the rotating shaft of the front handlebar of the main controller is worn out. The power supply shows low power. The multimeter directly measures the voltage of 24V, and the voltage appears to be normal, but in fact there is no electricity. The light doesn't respond. Capacitor doesn't respond. The electric pallet truck can only move forward but not backward: the directional contactor is in poor contact or burned out; the controller is faulty; whether the power supply of the directional contactor is faulty. Brake failure: The magnetic brake wire is loose or damaged; the brake pad of the magnetic brake is worn (the gap of the brake pads should be adjusted evenly, otherwise it will be easily damaged); the wire of the magnetic brake is loose or damaged; the coil of the magnetic brake is damaged. Defective brake travel switch. Fork does not rise: electric pallet lift truck the contactor power supply. Whether the rise switch is faulty, the hydraulic oil is insufficient, and the power supply is faulty. The fork does not descend: the oil return hole is blocked, the solenoid valve of the hydraulic station is out of control, and the gantry is stuck. Controller failure: observe whether the input, output and line voltage are normal, and judge whether the controller is good or not.

Other common minor faults:

The electric pallet truck does not move (the contactor does not work).

The electric lock switch is in poor contact or damaged; the power switch is in poor contact and the goods are damaged; the battery link is loose or falls off, the control circuit fuse is burned out, the main circuit fuse has been blown, and the battery power is seriously insufficient

The electric pallet truck cannot be driven (Contactor work)

The contactor contact is not in good contact, the MOSFET circuit board is faulty, the electric carbon brush is worn or the commutator is in poor contact with the carbon brush. The magnetic brake near the drive wheel does not pull in and is in a braking state.

The electric pallet truck can only go forward or backward

The contactor is in poor contact or burned out (cleaned or replaced) the circuit board is faulty.

The electric pallet truck cannot be stopped while driving:

The contactor of the contactor is damaged, and the moving contact cannot be reset.

Brake failure

The microswitch is faulty and the magnetic brake wire is loose or damaged. The magnetic brake pads are worn.

This is an internationally recognized standard which acts as a form of guarantee that everything Ningbo Staxx Material Handling Equipment Co.,Ltd. does is managed to the highest quality standards.
Ningbo Staxx Material Handling Equipment Co.,Ltd. are a market-focused, process-centered organization that develops and delivers innovative solutions to our customers, consistently outperforms our peers, produces predictable earnings for our customers, and provides a dynamic and challenging environment for our employees.
give you an additional pallet trolley option for your motorized pallet jack, whether it being a staxx pallet truck, +china +electric +stacker or powered pallet truck. Go and get more info at Staxx Pallet Truck.
By building an connection around Staxx Pallet Truck and catering specifically to the craft beer crowd, Ningbo Staxx Material Handling Equipment Co.,Ltd. was able to raise the capital and brand awareness needed to successfully break into the domestic market with a groundswell of support.
In the boundless Chinese market, there are a number of enterprises that provides battery operated pallet stacker pallet stacker truck of their own brand over the years, but few have won more support from customers on the international stage than Staxx Pallet Truck.