What are the minor faults that are prone to occur in all-electric pallet trucks? How to solve?

The all-electric pallet truck is a kind of logistics handling equipment that uses batteries as the driving force to move goods. It is widely used in various industries because of its advantages of environmental protection, low noise, comfortable and convenient operation, high efficiency and labor saving. Not only that, its repair and maintenance are also simpler and easier to use than ordinary trucks. Although the all-electric pallet truck is durable, it is inevitable that there will be some minor problems. The following electric pallet truck manufacturers will talk about the minor faults that are prone to occur in all electric pallet trucks, and how to solve them.

If the all-electric pallet truck trembles when it is lifted, there may be two reasons: one is that there is air in the lifting cylinder, which needs to be solved by the driver through the lifting method; the other is that the hydraulic system leaks oil As a result, this situation requires repair and replacement of the oil seal and cylinder. If the wheels of the all-electric pallet truck make abnormal noises during driving, on the one hand, it may be due to foreign matter mixed in the lubricating oil, and the lubricating oil needs to be replaced in time; on the other hand, it may be because the bearings are excessively worn or even damaged. At this time, the accessories need to be replaced as soon as possible.

If the battery of the all-electric pallet truck consumes too much power or cannot be charged, there are many reasons, which need to be checked and eliminated step by step. This may prompt us to add distilled water to the battery, or it may be because the battery is aging and needs to be replaced with a new one. In addition, it is also possible that the power socket has a bad contact and the contact surface needs to be repaired. The worst case scenario is that the battery is badly damaged and needs to be replaced as soon as possible. If the all-electric pallet truck is clearly loaded, but automatically descends, it may be due to oil leakage in the oil pipe or oil circuit interface, and it is best to replace the seal as soon as possible. It may also be because there is dirt in the electromagnetic, manual reversing valve, check valve, or the sealing ring is severely worn, resulting in internal leakage. Electric pallet truck manufacturers remind that in this case, the valve group needs to be cleaned and the seals replaced.

Although the all-electric pallet truck has many advantages that other pallet trucks do not have, it is normal for some minor problems to occur during high-intensity and long-term work. Electric pallet truck manufacturers tell drivers not to be too nervous, as long as they master the knowledge related to electric pallet trucks and carry out investigation and maintenance step by step, they can easily solve the problem.