What are the precautions for battery charging of semi-electric stackers?

The battery of the semi-electric stacker cannot be completely discharged, and should be charged until the charger returns the charging completion signal. In fact, there are still many precautions related to the battery charging of the semi-electric stacker. Next, let's learn the relevant content together. So that we can avoid stepping on thunder when charging the device in the future. Generally, the connection between the charger and the power supply is usually about 14 to 16 hours. After charging, the voltage of each single battery is about 2.7V, and the electrolyte density of each single battery will reach 1.27 to 1.29kg/1.25℃. Here we suggest that you should charge the electric stacker in time when you use more than half of it, do not leave the equipment for a long time, and charge and maintain the equipment after a short period of time, so don’t be careless.

The following are the key things to keep in mind during the charging process: The invisible battery is connected to an open flame, so as to prevent the gas from causing an explosion, causing a fire, and bringing unnecessary economic loss and personal injury. When charging, it should be in a well-ventilated environment. We recommend lifting the top cover of the semi-electric stacker, or taking the battery out of the pallet truck. Temporary wiring is not allowed. Make sure the insulator tightly wraps the charging cable to ensure the personal safety of the operator. The surface of the battery of the semi-electric stacker should be kept clean, and the surface of the battery should be wiped with an antistatic rag. Do not place tools or other metal objects on the battery. During charging, the temperature of the electrolyte should not be higher than 45°C. After the semi-electric stacker is charged, check the electrolyte level to see if it is 15mm higher than the separator. Under normal circumstances, add distilled water once a week. Avoid contact with the skin and acid. If it comes into contact with the skin, rinse with plenty of soapy water, or seek medical attention in time. Used batteries should be disposed of according to local regulations. We also want to talk about the battery conversion of semi-electric stackers. You need to start from the following four aspects:

1) Remove the battery solid screws

p>

2) Remove the cable from the battery terminals.

3) Slide out or hang out the battery.

4) Install the semi-electric stacker battery according to the reverse process indicated below, and tighten and connect correctly.

is a modern pallet stacker truck widely used in staxx pallet truck industry. It also enhances the quality powered pallet truck value of the products.
You can find a large selection of quality at Staxx Pallet Truck. Go get your desired one.
The proprietor has many years experience in providing promotion services and is a sought after expert in pallet stacker truck.
Ningbo Staxx Material Handling Equipment Co.,Ltd. offer various lines of products in line with international standards along with professionals who can offer suitable solutions pertaining to the existing problem in +pallet +truck +manufacturer pallet stacker truck.