loading

Staxx Pallet Truck is a professional warehouse equipment manufacturer and pallet jack supplier in China.

What are the precautions for the daily use of the cooling system of the all-electric stacker pallet truck?

by:Staxx Pallet Truck     2022-04-06

What are the precautions for the daily use of the cooling system of the all-electric pallet truck?

The all-electric pallet truck is an industrial handling vehicle powered by an electric motor and powered by a battery. It refers to various wheeled handling vehicles for loading and unloading, stacking, stacking and short-distance transportation of palletized goods. The International Organization for Standardization ISO/TC110 is called Industrial Vehicles.

Components such as cooling fans, radiators and thermostats constitute the cooling system of the electric stacker. The engine is used to drive the cooling fan, and the fan speed is the same as the engine speed. When the engine is started, the water temperature will also rise. Using the thermostat to adjust the water temperature has the advantages of convenient maintenance and low cost, but it is difficult to control the cooling water temperature well. To ensure that the cooling system is functioning properly, it must be checked regularly.

The wax thermostat is the most used thermostat on the engine at present. It can have different lifts at different temperatures, so as to dynamically control the temperature of the cooling water. Checking the thermostat is mainly based on the temperature difference between the inlet and outlet pipes of the radiator. When the engine starts for a period of time, touch the temperature difference between the inlet and outlet pipes with your hand, and after a while, touch the temperature difference with your hand again, if the temperature difference is significantly reduced, it means that the work is normal. You can also judge whether it is good or bad by removing the thermostat, placing it in cold water, and using the gradual heating method to check the valve opening temperature and valve electric pallet lift truck.

In the electric stacker, since the generator, cooling fan and water pump all share a belt, the tightness of the belt will not only affect the generator water pump The speed also affects the speed of the cooling fan. To check the fan, you can press down the middle of the belt with your fingers. The lower deflection is 11-13mm, which is normal. If it is too large, the water temperature will be too high; if it is too small, it will damage the bearings of the water pump and generator. You can also use a thin piece of paper to put it in front of the cooling water tank, and use the thin paper to check the fan. When the engine is running, if the paper cannot be attached to the water tank, it means that the fan is working normally. In order to ensure the normal operation of the fan, the fan blades cannot be installed backwards, and the fan protective cover must be complete and effective.

The radiator is generally located at the rear of the stacker. After the stacker has been used for a long time, some sundries and dust in the factory area will easily accumulate on the surface of the radiator. If it is not cleaned in time, it will affect the heat dissipation effect. Therefore, it should be carefully cleaned after the end of the daily operation, but it should not be used during cleaning. High-pressure water gun, because the tube wall of the radiator is relatively thin, if it is flushed with a high-pressure water gun, it will flush the wall of the tube, which will affect the heat dissipation effect. To avoid scale formation, the cooling water selected cannot be hard water.

The water pump is an important source of power for continuous circulation in the cooling water cooling system. If you want the cooling system to work properly, you must ensure that the pump can build up enough pressure. Checking whether the water pump is working properly can be judged by adding cooling water. When adding cooling water, if the coolant level will drop significantly with the increase of engine speed, it means that the water pump is working normally.

Electric stackers include: all-electric stacker pallet trucks, semi-electric stackers, forward-moving stackers, forward-moving all-electric stackers, forward-moving stackers, Pedestrian counterweight stacker. Electric stackers are widely used in factory workshops, warehouses, circulation centers and distribution centers, ports, stations, airports, freight yards, etc., and can enter the cabins, carriages and containers for loading, unloading, and handling of palletized goods. It is an indispensable equipment for pallet transportation and container transportation.

http://www.jsjxcc.com/news/436.html


Ningbo Staxx Material Handling Equipment Co.,Ltd. are maintaining a consistent bottom-line profit and that you've shown steady growth over the past few years.
Excellent quality yet affordable best at Staxx Pallet Truck. Don't miss out!
People are more likely to listen to an expert than just anyone off the street. So, while pack mentality is important, having a relevant expert speak to the effectiveness of a brand's product as Staxx Pallet Truck is essential to converting new consumers as well.
pallet jack manufacturers pallet stacker truck are used largely for +china +electric +stacker such as battery operated pallet stacker.
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...