What are the precautions when operating an electric forklift? Pay attention to these 9 items

1. Do not step on the slow down pedal before turning on the key switch, otherwise the forklift will have a fault code and the electric pallet truck will not operate.

2. The electric forklift will change directions during operation. When the joystick is turned to the reverse target, the electric brake will work, and the forklift will accelerate and start to move slowly to another target.

3. The steering system of the electric forklift is full hydraulic steering. When the oil pump electromechanical starts to work, the steering will be very difficult. It is necessary to initiate the oil pump electromechanical to easily realize the steering.

4. Stop stepping on the slower pedal and the brake pedal together.

5 , During operation, stop proper discharge and charge in real time. Temporary storage should also be compensated once a week.

6. Check the battery level of the electric forklift on time. If it is lower than the calibration line, it should be compensated for distilled water in real time. Tap water, river water, mineral water, avoid mixing miscellaneous antagonisms to cause external self-discharge failure of the battery, and do not increase the electrolytic hydraulic pressure, otherwise it will increase the electrolyte concentration and extend the battery life.

7. You need to pay extra attention during use to charge the battery and accurately maintain the battery in real time. Pay attention to the method when charging the battery, not only make the battery fully charged, but also can not form the proper amount of battery charging.

8. Move forward In the operation of the forklift truck, use the temporary long-distance slowing down as little as possible. When the vehicle starts and the speed increases, steady and slow down the pedal. If the road conditions are better, the vehicle will continue to slow down. When the vehicle needs to accelerate, grasp and slow down the pedal. Slightly step on the brake pedal, so that the acceleration energy can be fully used. If the vehicle has a regenerative braking function, the kinetic energy during acceleration can be emitted. When the vehicle is uphill, do not disconnect the circuit that drives the motor, and step on it slightly The brake pedal enables the vehicle to run under regenerative braking, and uses the kinetic energy of the vehicle to increase the energy consumption of the battery.

9. During the driving process of the forklift, do not use the 'moving, development' target The purpose switch is mistaken as a steering switch. Unless it is necessary to accelerate urgently, do not indirectly depress the brake pedal. If it is found that the battery is low during the driving process of the forklift (you can use the electricity meter, the power loss indicator and the rest of the alarm installation to lose ), the battery should be charged as soon as possible to avoid proper discharge of the battery.

If you have a staxx pallet truck business, be sure to choose a from Ningbo Staxx Material Handling Equipment Co.,Ltd.. After all, you need quality equipment in order to provide your customers with quality service.
If you follow these straightforward steps you can keep your pallet trolley pallet jack for sale. I think this article will help you make a wise decision on choosing the right .
Ningbo Staxx Material Handling Equipment Co.,Ltd.’s model also predicts (i) a positive effect of management on firm performance; (ii) a positive relationship between product market competition and average management quality (part of which stems from the larger covariance between management with firm size as competition strengthens); and (iii) a rise (fall) in the level (dispersion) of management with firm age.