loading

Staxx Pallet Truck is a professional warehouse equipment manufacturer and pallet jack supplier in China.

What precautions should be taken when using an electric material handler

by:Staxx Pallet Truck     2022-09-25

Many of my friends have never used an electric material handler before buying it, so there are a lot of wrong operations, which makes it very difficult. However, everyone is not. Next, we will explain to you what precautions should be taken when using electric material handlers.


1. When the user receives the electric material handling equipment for the first time, it is necessary to use the electric drive handling vehicle in the battery;

2. After the electric material handling equipment is transported or moved, the following checks must be made before it can be put into use: check whether the equipment is complete and in normal condition, if there is no problem, then check whether the hydraulic system is normal. If the battery has not been installed on the device, install the battery according to the operating specifications, but be careful not to damage the battery cable and affect the normal use.

3. Charge the battery after completing the above steps. If the equipment is parked for an extended period of time, the ground surface of the wheels may be slightly flattened. Don't panic at this time. Generally, the flattened part will automatically recover after a short drive of the pallet truck.

4. After completing the above preparation steps, the next step is the precautions for use during the running-in period. In the early stage of the electric material handling equipment being put into use, it is recommended not to allow the equipment to run at high load, especially within 100h, and the following requirements should be met: To prevent the over-discharge of the new battery during the initial use, it is recommended to generally be 20% Recharge in time.

5. The prescribed preventive maintenance should be thorough. Avoid sharp braking, sharp driving, or sharp turns. Change the oil or lubrication in time according to the regulations, and limit the load weight to 70~80% of the rated load. Always check whether the steering wheel of the electric material handling machine is turned normally, whether the tire pressure is sufficient, and whether the various parts are loose.


The above are the precautions when using electric material handlers. In addition, we would like to remind everyone that in order to ensure that the electric material handling vehicle can be used for a long time and does not affect the work process, everyone should do a good job of sun protection and rain protection of the equipment, and do regular cleaning and maintenance work.

I hope the content we provide will help you. If you have other questions about electric material handlers, you are welcome to contact us.

Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Leave Your Message inputting...