What should be paid attention to when charging the electric hydraulic pallet truck

Can the electric hydraulic pallet truck be charged for a long time? I believe this is the question of many users. What I want to tell you is that the electric hydraulic pallet truck charger should choose an intelligent charger. When the battery is fully charged, the charger will automatically power off, so there will be no problem of long-term charging, let alone the problem of explosion. In the use of the battery, we recommend using a special brand charger for charging, and no flammable and explosive materials should be placed around it, so that there will be no problem even if it is charged at night.

Let's take a closer look at the charging steps:

1. Turn off the red emergency stop switch and the key switch after parking in the charging area, and open the battery box cover;

2. When charging, make sure the heat dissipation of the device is smooth, and then check whether the electrolyte is in normal state. If the red buoy is exposed at 1cm of the white part, it is a normal situation. If it is not enough, add distilled water in time.

3. Unplug the connector connecting to the battery and the connector connecting to the motor.

4. Connect the battery connector to the charger connector.

The batteries of electric hydraulic pallet trucks are mostly lead-acid batteries, which take about 8 hours to fully charge, and can be operated at full load for about 4-5 hours after being fully charged. Remind everyone that each battery discharge cannot exceed 80% of the rated capacity of the battery. After the discharge is completed, it must be charged immediately. When the battery is fully charged, remember to check the electrolyte level and adjust the specific gravity with deionized water or distilled water in time.

Maintenance is essential if you want to extend the life of your battery. Check the battery connection wire and lead wire once a week for looseness or damage, and adjust and replace in time if there is any problem. Check battery voltage, electrolyte density, liquid level and temperature at least once a week. If you find that there is water in the battery box, drain it immediately. Before charging is complete, we need to record the voltage, electrolyte density and temperature of all single cells. If it is found that the measurement data is different, it is recommended to ask a professional to deal with it in time.

Another thing to remind is the battery storage problem. Uncharged batteries are suitable for storage in a clean and dry environment at 5-40°C, away from direct sunlight and heat sources. Do not invert, lay down, throw, roll, or place under heavy pressure. The storage period from the date of manufacture is 2 years. If it exceeds 2 years, the initial charging time should be appropriately extended. If our operation steps are strictly in accordance with the requirements, then the battery of the electric hydraulic pallet truck can be used for 2-3 years.

Ningbo Staxx Material Handling Equipment Co.,Ltd. has an array of branches in domestic for munufacturing pallet stacker truck.
To find an ideal of your need, please visit my site Staxx Pallet Truck.
pallet stacker truck allows users to apply in different ways for satisfying their needs.