What should I do if the electric stacker used in the cargo station cannot move forward or backward?

What to do if the electric stacker cannot move forward or backward in Jinan cargo station

When the workers of the freight station use the electric stacker to work, the fork of the electric stacker lifts normally, but the stacker cannot move forward or backward. How to deal with this situation?

First of all, don't panic in the face of this situation, stop work immediately, and ensure that there are no obstacles around you to collide with. Find a professional to inspect the electric stacker and do not disassemble it without permission. Check the electric pallet lift truck function first. After the display is normal, check the electricity meter. If it shows a lack of power, it should be charged immediately. If the electricity meter shows normal and there is no low battery condition, the battery problem can basically be ruled out.

Then check the drive system of the electric stacker. If the drive wheel is found to be motionless, the drive system should be removed and connected to another identical stacker, and then checked. It cannot be immediately considered that the drive part is faulty. If the other stacker does not move, then there is a problem with the driving wheel. Generally, there is a problem with the driving wheel, and the electromagnetic brake may be locked. Adjust the gap of the brake pads or replace the electromagnetic brake current line or replace the car assembly; if check It is found that the drive wheel assembly is working normally, and it should also be checked whether the drive motor can work normally. If it can work normally, the fault of the drive part can be ruled out.

The last is to check the controller. The hydraulic system of the electric stacker does not need a controller to control it, but only needs to be directly connected to the hydraulic motor pump station assembly to control the oil circuit. If the hydraulic system is normal, then the drive system controller is faulty. Summer is the season when the controller is most prone to failure. Because of the high temperature in summer, the heat dissipation of the controller will be affected. If the power is turned on for a long time, it will cause continuous heat generation. When the temperature exceeds a certain limit, the internal circuit will be easily short-circuited. malfunction. If the controller fails, the best way to repair it is to replace it with a new one, because the controller cannot be repaired by professionals.

It is beyond doubt that benefits powered pallet truck. Market sentiments are strong, especially in the light of growing pallet jack manufacturers observed globally.
A detailed plan must be developed if we hope to reach your profitability goal. Once we have a certain figure in mind, Ningbo Staxx Material Handling Equipment Co.,Ltd. and our staff need to determine all the steps necessary to reach that goal and act on them.
We want to be careful and deliberate about developing Staxx Pallet Truck, from the platform we choose, to the way we approach it, to the methods we use.
pallet stacker truck is receiving a great positive feedback in the market. And many of our clients are fully satisfied with it.