What should I do if the lifting hydraulic cylinder and the tilting hydraulic cylinder of the walking all-electric pallet truck move slowly

The hydraulic system is an important part of the walking all-electric pallet truck. In the process of using the equipment, problems will inevitably occur in this part. Before understanding the example, we should roughly know that the hydraulic system includes the hydraulic system of the working device and the hydraulic steering hydraulic system. The system has two parts. When checking the fault, it is necessary to eliminate the unreasonable factors in the design first, and then eliminate the factors that cause the failure of the descending speed limit valve and pipeline blockage based on experience.

When the engine speed of the electric pallet truck increases, the lifting hydraulic cylinder and the tilting hydraulic cylinder will move slowly. This is exacerbated as the engine revs increase, but the steering still works and the system can be heard humming regularly.

Then follow the steps to check item by item, so that you can find out whether there is any leakage in the electric pallet lift truck hydraulic cylinder. If there is an internal leak in the lifting hydraulic cylinder, hydraulic oil will flow out of the bleed plug. We suggest to stick a metal rod close to the safety valve on the multi-way valve of the pedestrian all-electric pallet truck, and listen carefully for the sound of overflow. This can prove that insufficient oil pressure is not the main reason for the slow movement of the lifting hydraulic cylinder and the tilting hydraulic cylinder. reason. Touch the pump with your hand and feel the frequency of the vibration. If it changes according to the engine speed, we can easily hear the low sound of the pump. In this way, we can preliminarily determine whether the pump is faulty.

If the cause of the failure is analyzed from the perspective of insufficient flow, the main reason is that the pump is insufficient in oil supply. Based on what we have observed and how long the equipment has been used, we can confirm that the low pump speed in the walk-through electric pallet truck is not the cause of the malfunction. Therefore, the failure factor may be concentrated in the pump's insufficient oil suction.

According to this judgment, when we took out the oil suction pipe of the pump in the walking all-electric pallet truck for inspection, it was easy to find that there were a lot of filter meshes accumulated near the oil suction port of the pump. After cleaning the filter screen, re-install a new oil filter on the walking all-electric truck, and then try to see if the equipment can resume normal operation.

The above is the solution to the slow movement of the lifting hydraulic cylinder and the tilting hydraulic cylinder on the walking all-electric pallet truck. If you have other questions, please call for consultation.

pallet stacker truck are all following the most compatible manufacturing regulations.
Ningbo Staxx Material Handling Equipment Co.,Ltd. will be familiar with the transformation from a generalist into a manufacturer, and will have the big-picture perspective necessary to stay focused on long-term goals.
pallet trolley pallet stacker truck is slower than hand pallet truck manufacturers but has a number of special applications, such as for hand pallet truck.
battery operated pallet stacker has become a serious problem for an increasing number of people around the world, that's why highly effective are developed by Ningbo Staxx Material Handling Equipment Co.,Ltd..
+pallet +jack +supplier pallet stacker truck with hand pallet jack are used extensively in semi electric pallet stacker.