When do you need to replace the forks of the semi-electric stacker?

The forks of a semi-electric stacker are an important part of the vehicle, and although everyone knows this, it is often overlooked. The warehouse forklift manufacturer customizes that replacing the fork at the right time can enhance the safety of the equipment. But when should the forks be replaced? In fact, there are some obvious signs that can remind us that it is time to replace, but if these signs are obvious, it means that immediate action should be taken. So today we will talk about when we need a device to replace the fork.

When the thickness of the fork of the semi-electric stacker is reduced by more than 10%, the storage forklift manufacturer customizes to remind everyone that the fork of the equipment needs to be replaced. Because when the thickness of the forklift fork is reduced to more than 10%, the use of the fork outside the plateau may make the equipment unable to lift the weight of the goods that could have been supported, resulting in accidents.

When the fork of the semi-electric stacker is no longer straight or aligned at the correct angle, the warehouse electric forklift manufacturer reminds everyone that the fork of the equipment needs to be replaced. It is very important to check the angle of the fork where the fork of the forklift meets the tool handle. If the angle exceeds the original angle 3°, the fork cannot continue to be used. We can't ignore the problem just because the change in angle is small, but small angles can cause big troubles. Therefore, we recommend that a special evaluation of the forks be stipulated every year. In fact, there is a better way to reduce this risk, which is to check this item as a routine project every month or quarter.

When the fork of the semi-electric stacker has cracks, it is an obvious sign to remind us to replace the fork. It is a very wise decision to deal with it early. Even if one of the two forks is faulty, both forks should be replaced. This is the same principle as changing tires. This is mainly to balance the use and life of the fork. Usually, one fork bears more daily wear and tear than the other. If the fork cannot be fully utilized from the performance level, The risk will increase significantly.