When the electric stacker is in use, it is not allowed to over-high, over-weight, over-speed and sudden braking

In recent years, mechanical equipment has gradually replaced labor, realizing a more orderly and standardized transportation of goods, which greatly saves some uncontrollable factors in the process of manual handling. In manual handling, if some goods are stacked too high, it will take more time to stack, which significantly reduces the handling efficiency, but electric stackers can do this well. However, although the electric stacker is good, the safety precautions in management and use cannot be ignored. Let's follow the editor to see what needs to be paid attention to.

I. Management and operating procedures:

1. The operator must be familiar with the general structure and performance of the equipment, and it is strictly forbidden to use the equipment with excessive performance;

2. Check all control and drive devices, operating handles, pedals, wheels and fasteners before use. If damaged or defective, they should be repaired;

3. The safety devices of the vehicle must be complete and intact, and all parts are sensitive and effective;

4. When handling, the forks must be inserted under the goods, and the goods should be placed on the forks evenly, and a single fork tip is not allowed to pick

5. Start, steer, drive, brake and stop smoothly, and slow down when turning on wet or slippery roads;

6. Do not overweight when using , Over-high, over-speed, no sudden braking and sharp turning;

7. No one is allowed to stand or walk under the fork;

Second, safe operation rules: < /p>

1. Before lifting, you must know the weight of the goods, and the weight of the goods should not exceed the rated lifting capacity of the lithium pallet truck;

2. When lifting and packing goods, you should pay attention to whether the goods are firmly wrapped, and do not carry them. For unfixed or loosely stacked goods, handle large-sized goods carefully;

3. Adjust the spacing of the forks according to the size of the goods, so that the goods are evenly distributed between the two forks to avoid eccentric loading;

4. After loading the cargo into the fork, lower the cargo as much as possible before driving;

5. Maintain a proper starting speed when starting, and should not be too violent;

6. When the vehicle is running, do not brake or turn sharply during high-speed driving;

7. Pay attention to pedestrians, obstacles and potholes when driving;

8. Maintain the standard driving state. When the fork is driving off the ground, the fork is 10-20 cm off the ground. When it stops, it will drop to the ground.

9. When leaving the car, lower the fork to the ground and lock the fixed wheels at the bottom of the car;

3. Pay attention when loading and unloading the car Matters:

1. Lifting the goods should generally be carried out in a vertical position;

2. During manual loading and unloading, the fixed wheel at the bottom of the vehicle must be locked and braked to stabilize the fork;

3. Walking and lifting are not allowed to operate at the same time;

The above is the operation requirements and precautions for the management and use of electric stackers introduced by Xiaobian. I hope Everyone can help after reading it. Electric stacker is a very common machine for handling goods in storage. Its safety operation requirements and precautions must not be ignored. Operators should strictly follow the operation requirements and precautions of electric stacker.

Every day of the year, there is some city or town in the world that is changing over to for pallet jack for sale.
To discover more about the powered pallet truck benefits of , go to Staxx Pallet Truck.
Ningbo Staxx Material Handling Equipment Co.,Ltd. has developed its range of products around its own market research, which discovers customers' precise needs.
Ningbo Staxx Material Handling Equipment Co.,Ltd. manufactures pallet stacker truck with innovative facilities and professional operation.
Many business owners and professionals use services like Ningbo Staxx Material Handling Equipment Co.,Ltd. to stay on top of manufacturing industry, monitor products’ quality and keep an eye on competitors.