Staxx Pallet Truck is a professional warehouse equipment manufacturer and pallet jack supplier in China.

Home  > Info Center  > News  > 

Winter Maintenance Guide for Lithium Pallet Jacks

Winter Maintenance Guide for Lithium Pallet Jacks


You've invested a lot of time and money into your lithium pallet jacks. You want to make sure it's ready for the season, so here are some suggestions for keeping your lithium pallet jacks in good working condition:

Winter Maintenance Guide For Lithium Pallet Jacks

Refrain from charging the battery while the lithium pallet jack is stored in direct sunlight. Keep your lithium pallet jacks in a cool, dry place daily. Please do not leave your electric pallet jack charger plugged into an electrical outlet when you're not using it. If you do so, the battery will draw power from the charger and could damage itself or your lithium battery pallet jack. 

Keep Your Electric Pallet Jack Away From Salt And Sand

Avoid storing your lithium battery pallet jack in a warehouse that is exposed to salt or sand. If you must store the pallet jack in such a location, cover it to prevent corrosion from occurring on the surface of your equipment. If you need to use your equipment on-site, clean it thoroughly before returning it into service by removing any debris or other contaminants that may have accumulated over time.

Avoid Storing A New Battery In Its Discharged State

Avoid storing a new battery in its discharged state. The best way to charge your lithium battery pallet jack is to use it until it reaches at least 60% of its capacity. This will allow you to get the most out of your vehicle and ensure you don't overcharge or overuse your new battery. If you're running low on power while working outdoors, charging up before driving again can help prevent problems such as low voltage warnings and damage from overheating during hot weather conditions.

Before using a new lithium pallet jack battery for extended periods (e.g., during winter months), make sure that it's fully charged first by using an appropriate charger appropriate for the type/size of cells used within them--the higher quality ones tend last longer! Also, remember not only how much energy goes into making something like this possible but also how much goes into making sure those things remain working properly once constructed, too.

Store Batteries In A Room-temperature Environment

Store batteries in a room-temperature environment. Avoid storing batteries in direct sunlight and storing them near heat sources such as fireplaces or radiators. You can keep your lithium pallet jack batteries at room temperature if you store them in an enclosed cabinet or box that is kept away from other metal objects, such as nails and screws. Do not store batteries in damp or humid environments like closets or garages where mold may develop on the surface of the lithium metal cells, causing corrosion damage to those surfaces over time. Keep your lithium pallet jack battery packs at least 1 inch above any other materials, so they don't get wet inside this enclosure!

Check For Damaged Components

●Check for cracks in the battery case. This can cause a short circuit, damaging components inside your electric pallet jack.

●Check for broken or loose wires. If you see any broken wires, it's recommended that you replace them immediately, so they do not get loose and cause problems during use later on down the road.

●Check for loose or broken parts such as gears, bearings, and wheels (or other moving parts). If one of these gets damaged or dislodged, then there may be issues with how well this particular part functions properly within its given space/area within your machine itself.


The seasonal maintenance of your electric pallet jack is crucial to its longevity and functionality. This guide will help you identify the most common issues, provide solutions, and even show you how to prevent some issues from happening in the first place. By following these tips, you can ensure that your lithium pallet jacks remain reliable for many years!

Chat Online 编辑模式下无法使用
Leave Your Message inputting...