Customized Summary of Common Problems of Manual Lift Hydraulic Platform Truck

Customized hydraulic manual lifting hydraulic platform trucks must undergo formal inspection and debugging before leaving the factory, and can only be put on the market when various technical indicators meet the standards. Connect the power supply when in use, the hydraulic, electrical and other systems do not need to be adjusted, and are placed on a solid and flat ground during use to avoid overturning. This is just one of the problems. For specific problems, we will analyze them with you.

If the workbench does not work, stop it immediately for inspection; when the working pressure of the electric lift is too high or produce abnormal sound, immediately shut down and check to avoid more serious damage to the machine; If the axle pin or screw is found to be loose, the customization reminds everyone to lock the manual lifting hydraulic platform truck in time to prevent the axle pin from falling off, causing personal injury and property damage. The hydraulic oil should be kept clean and replaced every six months; during maintenance and cleaning of the electric pallet lift truck, the safety prop must be supported.

Next, I will discuss some common problems in detail. I hope you will remember them carefully, because they may be used in the future use of the equipment:

The lift cannot lift or the lift force is a very headache. This may be because the pressure adjustment of the relief valve does not meet the requirements, and it can be adjusted to the standard pressure value; it may also be because the oil cylinder leaks. At this time, we need to check the components and prompt to replace the oil cylinder if necessary; if it is found that the hydraulic platform is manually lifted and lowered If the reversing valve is stuck or leaking, the valve assembly can be replaced. If the oil level is too low and the oil inlet filter is blocked, then you need to clean the oil filter.

When the lift table is maintained, the staff must hang the lift when entering the lift table to prevent the lift table from falling suddenly and causing danger. Check the rollers, intermediate shafts, bearings, cylinder pins, bearings and other components once a month, as well as the lubricity and wear of the boom hinge shaft and bearings; also check the hydraulic oil quality and oil level. When the lift table is raised, the hydraulic oil level should be 40-50mm higher than the bottom of the oil tank. When the oil color of the hydraulic oil becomes dark, the oil quality is sticky, and there is grit in the oil, etc., we remind you to replace the hydraulic oil in time.

Customization is recommended to check the hydraulic and pipeline connection parts of the manual lifting hydraulic platform truck once a year. If the pipe is damaged, replace it immediately, and tighten the pipe joint when the connection part is loose. Remove and disassemble the lowering valve, blow the valve core with compressed air and re-install it. Drain the hydraulic oil in the oil tank, open the oil tank and take out the oil suction filter, clean it and install it in its original position, and then fill it with new oil.

At the same time, as the recent research of Staxx Pallet Truck shows, the benefits of improved productivity and firm performance can make implementing basic management practices worth it.
And finally, if you want to find additional resources for pallet stacker truck, simply go to Staxx Pallet Truck for more.
According to the market analysts, exports from Ningbo Staxx Material Handling Equipment Co.,Ltd. facilities in China will exceed the forecast.
pallet stacker truck provider at Staxx Pallet Truck offers a wide variety of in many options. quality is absolutely ensured if you choose us. welcome to visit our factory.