Electric hydraulic pallet truck battery usage problems

Nowadays, the use of electrohydraulic pallet trucks can be said to be more and more widespread. In the daily handling work, more emphasis is placed on work efficiency and cost control. The use of electric forklifts can effectively resolve these two problems at the same time. Not only that, Jiangsu electric forklift manufacturers are also responsible for environmental protection, because using electricity as power will avoid the generation of pollutants, and the noise is very small, which is of great benefit to people's physical and mental health. However, many people don't know much about the maintenance work of electric forklifts and related common sense, so let's popularize the relevant knowledge for everyone.

When it comes to electro-hydraulic pallet trucks, we cannot avoid the related content of batteries. People's maintenance work on electric forklift batteries is a short board, and it will even be ignored. But what Jiangsu electric forklift manufacturers want to tell you is that doing a good job in maintenance will prolong the service life of the equipment. You can compare the electric forklift of the same model under the same conditions, which one will break down first, whether it is carefully maintained or ignored? The answer is clear at a glance. We need to understand that replacing the battery also costs money, so why spend such a waste of money?

Before charging the battery of the electric hydraulic pallet truck, check the battery temperature to see if it is lower than 30°C and whether the electrolyte level is not lower than the separator. Jiangsu electric forklift manufacturer recommends to check whether the wire can be used normally, connect the battery charging socket to the charging plug of the charger, and then put the charging device in the open position.

During the charging process of the electric hydraulic pallet truck battery, the battery temperature must not exceed 45°C. If it exceeds this range, stop charging, wait for the battery to cool down and then recharge at a lower current to ensure electricity safety. Generally, the charging time is 14-16 hours. After charging, the electrolyte density of the battery will reach 1.27-1.29kg/1.25℃, and the voltage will be about 2.7V. Jiangsu electric forklift manufacturers suggest that everyone should do a good job of charging and maintenance on the day after using the electric forklift.

After the battery of the electric hydraulic pallet truck is fully charged, disconnect the charging current of the charger,“stop (STOP)”The indicator light is on. At this time, turn off the switch and unplug the charger to avoid accidents and unnecessary losses.