Electric Pallet Truck Electric Hydraulic Pallet Truck

Today, electric pallet trucks are popping up in storage facilities. The electric pallet truck uses the battery as the power source and is driven by a DC motor. The hydraulic power unit is easy to operate, has high efficiency and saves time. And low noise, no pollution can be widely used in many different industries, has become the preferred equipment of many manufacturers. So how to operate the electric truck correctly?

I. Inspection before the electric truck is operated

1. On the ground where the electric truck is parked, check whether there is any Hydraulic oil, gear oil, electrolyte leakage.

2. Check whether the forks of the electric truck are cracked or bent.

3. Check the wheels of the electric truck for cracks, damage or abnormal wear. Check for loose wheel fasteners on the electric truck. Check to see if the rope is around the wheel of the electric truck.

4. Check whether the left and right front forks and link mechanism of the electric pallet truck are cracked and cracked; whether there is any interference in the movement, and whether the corresponding movement points are severely worn.

5. Open the rear hood and hood of the electric truck, loosen the hydraulic oil filler cap, pull out the oil dipstick of the electric truck, and check whether the oil level of the electric truck is between the scales . Supplement when insufficient.

6. Close the hood of the electric pallet truck, open the battery cover, and check whether the pressure plate of the electric pallet truck is securely installed. That is, whether the battery of the electric truck is fixed firmly and reliably. Check whether the wiring of the two terminals of the battery of the electric truck is loose or damaged, otherwise it should be adjusted or replaced.

7. Press the electric pallet lift truck button of the electric truck to check the electric pallet lift truck of the fork. Press the down button of the electric pallet truck to check the descending condition of the fork, and check whether the hoisting system of the electric pallet truck makes abnormal noise.

8. Press the control handle of the electric truck to the inclined position, and gradually press the acceleration control button with the thumb toward the outside of the body to observe the forward operation of the electric truck; use the thumb to the inside of the body Gradually press the acceleration control button to observe the backward operation of the electric truck.

9. The electric pallet truck runs forward or backward at a slow speed, push the control handle forward to the vertical position or press down to the horizontal position, and observe the braking condition of the electric pallet truck.

10. Turn the operating handle left and right to make the electric truck run three times on the left and right, and check whether the steering system of the electric pallet truck is normal.

11. Press the horn of the electric truck to check the sound.

12. Press down the emergency power-off switch of the electric truck to check whether the power is cut off immediately.

13. Check the electric truck for abnormal noise.

Second, the drive and operation of the electro-hydraulic truck

Starting of the electro-hydraulic truck

1. Plug the electric hydraulic truck into the battery plug.

2. Turn on the emergency power-off switch of the electric hydraulic pallet truck.

3. Turn on the key switch of the electric hydraulic truck.

Advance of the electric hydraulic truck

1. Press the handle of the electric hydraulic truck backwards with both hands to between 0°-90°.

2. Turn the direction and speed control button of the electric hydraulic pallet truck backward and gradually with the thumb.

3. The electric hydraulic pallet truck runs backwards.

Deceleration of the electric hydraulic pallet truck

1. Slowly loosen the thumb, the direction and speed control button of the electric hydraulic pallet truck will automatically return, and the speed of the electric hydraulic pallet truck will drop. .

Steering of the electric hydraulic truck

1. Hold the left and right handles of the control handle of the electric hydraulic truck with both hands, press down to the inclined position, and move the control handle left and right to realize electro-hydraulic The truck turns.

2. When turning left, the electric hydraulic pallet truck turns left; when turning right, the electric hydraulic pallet truck turns right.

Brake of the electric hydraulic pallet truck

1. When the thumb leaves the direction and speed control button of the electric hydraulic pallet truck, and move the handle to the horizontal or vertical position, the electric Hydraulic truck brakes.

Stopping of the electric hydraulic truck

1. The electric hydraulic truck decelerates, that is, the thumb gradually loosens the direction and speed control button of the electric hydraulic truck.

2. Return the handle of the electric hydraulic truck to the vertical position.

3. The fork of the electric hydraulic truck is lowered to the lowest position.

4. In the 'OFF' position of the key switch of the electric hydraulic pallet truck, press the emergency power-off switch of the electric hydraulic pallet truck, unplug the battery plug, and take off the key for safekeeping.

Loading and unloading of the electric hydraulic truck

1. The electric hydraulic truck should approach the goods carefully.

2. Adjust the height of the fork of the electric hydraulic truck so that the fork can fork into the pallet as much as possible.

3. The electric hydraulic truck lifts the goods a few centimeters and confirms whether the goods are firm.

4. The electric hydraulic truck leaves slowly.

5. The electric hydraulic truck lowers the goods to the low position.

Unloading of the electric hydraulic truck

1. The electric hydraulic truck is close to the place where the goods are placed.

2. The electro-hydraulic truck lifts the load to the correct height.

3. The electro-hydraulic truck moves forward, places the load on the unloading position, and stops.

4. After confirming that the cargo is unloaded directly above, the fork of the electric hydraulic truck slowly descends until the fork is withdrawn from the cargo.

5. Lower the fork of the electric hydraulic truck to a position 15-20cm above the ground.

Park of the electric hydraulic truck

1. The electric hydraulic truck is parked in the designated place.

2. Lower the fork of the electric hydraulic truck to the lowest position.

3. Turn off the key switch of the electric hydraulic truck and remove the key.

4. If the electric hydraulic truck is parked for a long time, press the emergency power-off switch and unplug the battery.

Ningbo Staxx Material Handling Equipment Co.,Ltd. who is highly knowledgeable about manufacturing as well as selling and confident in our ability to create finest products as pallet stacker truck pallet jack manufacturers.
Staxx Pallet Truck is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.
It is one of the best products available in the market today. pallet stacker truck is famous product in many oversees market.
staxx pallet truck pallet stacker truck may be adapted for use at any hand pallet jack and is suitable for powered pallet truck.