Electric pallet truck manufacturers talk about how to prevent the failure of semi-electric hydraulic pallet trucks

Nowadays, semi-electric hydraulic pallet trucks produced by electric pallet truck manufacturers have become very common handling equipment in factories and warehouses. The use of this equipment will not only reduce operating costs, but also protect the working environment to a certain extent, because this equipment has the characteristics of environmental protection and noise reduction. But no matter how good the equipment is, if it is not well maintained, its service life will not be long. Therefore, today we will talk about how to prevent the failure of semi-electric hydraulic pallet trucks.

Before that, the electric pallet truck manufacturers first come to understand the reasons for the failure of the semi-electric hydraulic pallet truck. In fact, most of the reasons here are from man-made sources. We can recall, is there a case of careless maintenance of the carburetor, and the spring spacer fell into the intake pipe? This will cause the piston to become invalid. In addition, if the antifreeze water blockage loosens the oil pan and water enters it and the crankshaft timing gear is damaged due to early collision, it is easy to find a bulge, and the bulge will push the timing gear on the camshaft. , resulting in abnormal engine noise.

In addition, the sealing ring on the valve guide of the semi-electric hydraulic pallet truck is not properly installed, causing the exhaust pipe to drip oil. At this time, there will be some noise, but the abnormal sound is heard. The staff did not take appropriate first aid measures in time, and the result was that the shaft was scrapped. In addition, if the connecting rod bolts are tightened too tightly, it will be damaged, and it will also cause damage to the engine ramming cylinder. manufacturers hope that the majority of staff will pay attention to this.

The following electric truck manufacturers are teaching you a way to prevent oil leakage. In the daily maintenance process, we need to do a good job in the maintenance of various gaskets, such as: the oil pan or valve cover is not easy to be compacted due to the large touch area, and oil leakage will occur. The oil leaking from the oil seal at the rear of the crankshaft will enter the clutch, which will not only consume oil, but also cause the clutch plate to slip and burn. When the cooperation gap between the main bearing and the journal is too large, the front and rear oil seals will lose their tightness and cause oil leakage in the crankshaft head, or oil will seep in the clutch, resulting in pollution and slippage of the friction plates.

There is no way to prevent it. According to the parts service life list provided by the electric pallet truck manufacturer, each semi-electric hydraulic pallet truck will have a parts usage statistics table, and the starting time of each wearing part and the equipment operation time (in hours). ), etc. for specific records, and compare with the service life table, as long as it reaches the time in the service life schedule of the parts provided by the manufacturer, it should be replaced in time.

Ningbo Staxx Material Handling Equipment Co.,Ltd. thinks that customer satisfaction is one of the most important determinants of brand loyalty. High-quality service can be the difference between a one-time buyer and a lifelong repeat customer.
Reach us at Staxx Pallet Truck. We'll always try to give you the BEST deal on . If we can't, we'll at least give you some hel pful advice. Please use our experience!
pedestrian pallet stacker pallet stacker truck is characterized by various advantages, such as electric stacker, pallet jack manufacturers and +pallet +truck +manufacturer, which is not the case with other pallet stacker truck.
Provide pallet stacker truck strategists with enough funds to adequately market our company and the products and services it provides.
The best way of powered pallet truck is to get a hand pallet truck price pallet stacker truck.