Explanation of operation steps of aerial work equipment

The operation of aerial work equipment often requires a lot of basic knowledge. The equipment operation steps are mainly divided into five, let's take a look now! Step 1: (Before use) 　　 patrol inspection equipment (appearance of the equipment, basic fastening device) 　　 Note: Ensure that the diesel oil level is always more than one-half and ensure the quality of the diesel Step 2: (Before use) 　　 Function test (ground Control module, platform operation module, emergency switch test) 　 　 Step 3: (Before use, in use) 　 　 Safety assessment ① Confirm all dangers, look down, look around, look up ② Four communication. Your own ideas; other people's ideas; streamline construction personnel; emergency drop 　　③ eliminate risk factors. Eliminate those risk factors that can be eliminated. ④ 100% avoid those factors that cannot be eliminated but are foreseeable. Step 4: (In use) 　　 Correct and accurate operation steps: 　　 ① Insert the key accurately into the ground module key jack ② Pull out the emergency switch to power the vehicle ③ Turn the key Select 'Ground Module Control' to perform ground operations, and select 'Platform Module Control' to perform platform operations. Do not operate both ground and platform at the same time. ④ Use the foot switch and pull-out switch correctly when operating the platform ⑤ Use various function keys correctly ⑥ Pay attention to the walking direction (black and white arrow signs) 　 　 Step 5: (After use) 　 　 Correct and appropriate drop and storage if it is a straight arm or a curved arm Please raise the platform when storing the truck (to prevent damage to parts caused by non-operator operation).　　 For example: some equipment has a working range selection switch, and the order should be paid attention to when descending.　　 In summary, everyone can clearly know the five major steps to be taken when using high-altitude equipment. I hope these contents can help you.