Operating requirements for electric stacker

Nowadays, the warehouses of many production workshops are relatively high. It is difficult for ordinary forklift equipment to meet the requirements of cargo handling and stacking. Using electric stacker equipment can solve this problem very well. How to operate this type of equipment? What are the operational requirements? The following editor will give you a brief introduction.

1. Start: Before starting the electric stacker, check whether the battery is fully charged and the indicator light is normal. Insert the key into the lock hole and turn it clockwise to start the device.

2. Forward/backward: Pull the control handle of the stacker equipment backward, swing it down to the vertical position, and then turn the two rotary switches with the thumb, and the rotation direction of different equipment is different. The forward and backward speed of the equipment is also controlled by the angle of the rotary switch. When the operating space around us is small, the operating speed of the equipment should not be too fast for safety reasons.

3. Lifting of the fork: The lifting of the electric stacker is generally on the control handle. The button with the rising mark on the handle controls the fork to rise; the button with the falling mark controls the fork to descend; when we release the button, the equipment will stop lifting.

4. Safety switch: When the stacker equipment is retreating, touch the red safety switch, the equipment will immediately stop the backward operation, and move forward for a certain distance in the opposite direction; prevent the body from being squeezed and injured during operation.

5. Parking operation: When parking the electric stacker equipment smoothly, you only need to reset the rotary switch that controls forward/reverse. At this time, the controller will generate a reverse current, allowing our equipment to stop smoothly after a short distance, so we Pay attention to the control distance when parking the equipment.

6. Daily charging: When the power of the device is insufficient, it should be charged in time. When charging, pay attention to turn off the electric lock and pull out the key to prevent safety problems such as accidental touch during charging.

The above is the specific method of the operation of the electric stacker compiled by the editor. The operation of the electric stacker is not difficult, but we must pay attention to the relevant safety operation issues during operation to avoid safety problems during the operation.