Safe driving of small electric pallet trucks is important

The small electric pallet truck is an environmentally friendly storage pallet truck with all-electric power storage. Compared with internal combustion pallet trucks, electric pallet trucks have the advantages of no pollution, convenient operation, energy saving and high efficiency. With the development of economy and the improvement of environmental protection and energy saving requirements, small electric pallet trucks have developed rapidly. The market sales of forward-moving stackers are increasing year by year. Especially in ports, warehousing and tobacco, food, textile and other industries, small electric pallet trucks are gradually replacing internal combustion pallet trucks.

Before the small electric pallet truck is operated, the appearance of the small electric pallet truck should be checked, and lubricating oil and cooling water should be added. Check whether the indicator light and audio signal of the forward stacker are complete and valid.

When the small electric pallet truck starts, it is necessary to maintain an appropriate starting speed and not too violent.

Note the voltage of the forward stacker voltmeter. If the voltage of the vehicle in front is lower than the limit voltage, the vehicle in front should stop running immediately.

When the forward pallet truck is driving, it is not allowed to change the direction of the forward stacker by turning the direction switch, so as not to burn electrical components and damage the gears.

It is not recommended to move and electric pallet lift truck the pallet jack at the same time.

Pay attention to whether the drive system and steering system of the front-loaded vehicle are normal. If abnormal sound is found, please troubleshoot in time. It is strictly forbidden to use the forward stacker to work.

When moving forward, the stacker must decelerate in advance.

Do not lift the fork too high when the small electric pallet truck is driving. When the forward stacker enters and exits the construction site or drives, pay attention to the obstacles in the air. When the pallet truck is moved forward, if the pallet truck is lifted too high, it will increase the height of the overall center of gravity of the pallet truck and affect the stability of the pallet truck.

After moving the stacker forward, lower the forks to the normal travel position before traveling.

When the small electric pallet truck is loading items, the distance between the two forks should be adjusted as needed to balance the load of the two forks. One side of the goods should be close to the shelf. The fork load weight of the reach stacker should conform to the load center curve mark. Regulation.

Precautions for small electric pallet trucks

The weight of the goods must be known before lifting, and the weight of the goods must not exceed the rated lifting capacity of the forward stacker.

When the small electric pallet truck lifts and packs the goods, pay attention to whether the goods are tightly packed.

According to the size of the goods, adjust the fork spacing of the front pallet truck, so that the goods are evenly distributed between the two forks of the front pallet truck to avoid partial load.

When the fork is inserted into the stack, the mast should tilt forward. After the goods are loaded into the forks, the mast should be tilted back so that the goods are close to the fork walls and the goods are lowered as much as possible. drive.

Small electric pallet trucks should generally be carried out in a vertical position when lifting goods.

When loading and unloading manually, the fork must be stabilized with the handbrake.

The walking and lifting of small electric pallet trucks are not allowed to operate at the same time.

When small electric pallet trucks carry goods on steep slopes, pay attention to the firmness of the goods on the forks.

Given the important role played by in ensuring proper functioning of pedestrian pallet stacker, every individual must take an interest towards improving portable pallet jack.
Ningbo Staxx Material Handling Equipment Co.,Ltd. intends to make enough profit to generate a fair return for our investors and to finance continued growth and development in pallet stacker truck.
Obviously, financial return is important in manufacturing pallet stacker truck, but I think that's not enough. I think many customers want to support something they really believe in.