Safety and environmental management measures during maintenance

What are the safety and environmental protection management measures during the maintenance period: 1. Adhere to the safety and environmental protection process control and management of major maintenance projects, and the post (maintenance) person in charge, workshop safety personnel, and safety personnel shall adopt three-level safety and environmental protection supervision and control. 2. Where there is no pre-hazard analysis, no clear safety technical measures, and various types of tickets that are compatible with the maintenance task, the on-site security situation is poor (no safe passage, no lighting at night, no safety guarantee for three-dimensional crossing operations, etc.), maintenance Personnel have the right to refuse to perform tasks. If employees are forced to perform tasks ignoring the on-site conditions, they shall be dealt with according to the illegal command and the executor shall be dealt with according to the illegal operations. 3. After parking, all workshops must set up day and night safety warning signs in dangerous areas (containers of flammable, explosive, poisonous, and easily burned media, square pits, and underground wells), and seals must be affixed to open access holes for the purpose of Anyone entering the precautionary zone must not be mistaken. Special personnel must be set up on duty in the storage tank area, and a responsibility system must be established to implement responsibilities. Provide contact signals and alarm methods to prevent accidents. 4. Safety personnel at all levels are required to perform key monitoring of dangerous maintenance items, taking into account general maintenance items, to achieve full, all-round, and uninterrupted safety monitoring throughout the entire process, and to make safety process control records in accordance with the prescribed format. 5. The storage of various wastes generated during the maintenance should be placed in the specified location as required, and safety and environmental protection measures such as rain prevention, leakage prevention, fire prevention, and loss prevention should be taken according to their nature. Measures such as anti-spilling and anti-leakage measures should be taken during the transportation of waste. The transportation department (or individual) is responsible for cleaning up the waste and leaked liquid during the transportation. 6. In the event of near misses and other accidents, inspections must be stopped for rectification, and work cannot be resumed until the cause of the accident is found out, the responsible person is dealt with, the employees are educated, and preventive measures are formulated. 7. All workshops strictly control fatigue operations and prevent employees from working more than 10 hours a day. Try to reduce night maintenance work. When night maintenance must be arranged, prepare the materials required for night maintenance in advance to ensure sufficient lighting and complete protective equipment , Blind plates used for maintenance should be added or withdrawn according to the preset blind plate diagram and number. 8. Clean up the site in time after maintenance. The protective devices and safety facilities of the equipment, as well as the removal of covers, fence handrails, lightning protection devices, etc. should be restored to their original state. The scaffolding, temporary wires, and temporary warning signs used for maintenance should be removed. The first aid facilities, fire-fighting equipment, and protective equipment moved during the overhaul should be restored to their original state.