Share a sudden start can cause cargo to fall and forklift to roll over

It is very convenient to use electric forklifts to carry and stack goods. Now the forklifts are constantly improving, and their performance has become better and better. The light and compact body is suitable for operation in more sites, and the battery life in the later period has also been greatly improved. Change. The left and right lifting of electric forklifts plays an important role in handling goods. They make handling easier. However, many people are not very clear about how to use the left and right lifting functions of forklifts. Let the electric forklift manufacturers share the use. A little trick to electric pallet lift truck left and right.

Depress the clutch control plate, operate the forward and reverse levers and gear, then slowly release the clutch pedal completely. But remember to prohibit brutal driving: do not turn on the key switch when the accelerator pedal is pressed, do not start, brake or steer suddenly, in order to prevent the goods from falling, the electric lithium pallet truck will tip over, and do not run over the road scattered on the road. Baffles or obstacles. When driving on wet, slippery, uneven or sloping roads, please reduce the driving speed and ensure that there is a certain clearance between the mast and the roof and the entrance and exit.

When the fork is raised, do not drive the electric lithium pallet truck to prevent the goods from falling and the electric pallet truck tipping over. Do not drive by the side of the road, and ensure that the electric forklift has a sufficient safety distance from the curb or the edge of the platform to prevent the electric forklift from falling. It is forbidden to operate the handle suddenly, no matter in the state of full load or no load, the hydraulic control handle should be operated slowly; when the fork is in a high position, if the handle is suddenly operated, it will cause the danger of the goods falling or the electric forklift tipping; Drop shelves.

Before leaving the electric lithium pallet truck, the gantry is slightly forward, and the fork is naturally lowered. If the fork does not drop to the ground, there is a danger of tripping and bodily injury, put the steering handle in the neutral position, pull up the parking brake handle; turn off the key switch and remove the key.

The above is the method shared by the electric forklift manufacturers to use the left and right lifting functions of the forklift. I hope it will be helpful to everyone. The driving operation of electric pallet stacker is not very complicated, but relevant practitioners should follow the driving rules when driving, and keep in mind the precautions when using them, otherwise accidents may occur. Before and after normal use, it is necessary to carefully check whether the performance of the forklift is in good condition. If there is a fault, it should be suspended and repaired in time, which can also prolong its service life.

Ningbo Staxx Material Handling Equipment Co.,Ltd., as well, confirms that consumers who want ethically produced goods do the work of looking for them.
Ningbo Staxx Material Handling Equipment Co.,Ltd. will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
Ningbo Staxx Material Handling Equipment Co.,Ltd. has been focusing on reaching the ideal profits.