What are the common faults of semi-electric stackers?

1. The forks of the semi-electric stacker have fixed pallet type and movable fork type. The thickness of the movable fork is 70mm by default. If you have special requirements, you can customize a smaller or larger thickness. There is a gasket at the joint between the root of the movable fork and the stacker, and the height of the gasket is adjusted by screws to achieve the purpose of adjusting the height of the front end of the fork. 2. Oil leakage of semi-electric stacker trucks. Most of the oil leakage is at the connection between the oil pipe and the cylinder or pumping station. The seal is not tight. Use a wrench to tighten the nut on the connection a few more turns, but remember Do not use too much force, otherwise it will cause slippage, which will be troublesome. If it is confirmed that the nut has been tightened or the oil is still leaking, the nut must be disassembled, its gasket or explosion-proof valve must be replaced with the correct model or new, and re-tightened. Generally, this type of failure can be resolved. When disassembling the nut, the fork must be lowered to the lowest level, so that all the hydraulic oil in the oil circuit returns to the oil cylinder of the pump station to avoid a large amount of leakage. 3. The left and right balance wheels of the semi-electric stacker truck are not level. This phenomenon is mainly caused by the stacker truck deviating from the center of gravity during the daily load, resulting in excessive pressure on one side, and the rear cover can be opened, respectively. Unscrew the screws on the left and right balance wheels, put some spacers on the lower balance wheels, or reduce the spacers on the higher balance wheels to achieve left and right balance. 4. The circuit part of the semi-electric stacker rarely fails, but correct maintenance and use are also necessary. For example, do not use the stacker under voltage, and do not use the stacker while charging. If you do not use it for a period of time, you must charge the stacker frequently to keep the battery fully charged and rain-proof. It is best if the power is unstable in the place of use. Equipped with voltage stabilizing facilities, no overload, etc. The left and right balance wheels of the semi-electric lithium pallet truck are not level. This phenomenon is mainly caused by the lithium pallet truck deviating from the center of gravity during the daily load, resulting in excessive pressure on one side, and the rear cover can be opened and unscrewed separately For the screws on the left and right balance wheels, put some shims on the lower balance wheels, or reduce the shims on the higher balance wheels to achieve left and right balance.
need huge investment, so it is important to shop with caution.
Ningbo Staxx Material Handling Equipment Co.,Ltd. will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
pallet stacker truck can be applied in different ways as powered pallet truck.
The proprietor has many years experience in providing promotion services and is a sought after expert in pallet stacker truck.