What are the non-standard models of electric pallets?

The common non-standards of electric pallet trucks are generally changes in the length of the forks or changes in the outer width of the forks, or both. The increase of the fork length will have a greater impact on the load capacity. For this type of review, in order to accurately grasp the load capacity, it is best to provide the layout of the goods on the forks, and the uniform load or several fulcrums. The contact of the forks and the rigidity of the goods themselves have a great influence on the carrying capacity of the forks. In some cases, in order to ensure the carrying capacity, the width and height of the fork can be appropriately increased when the usage conditions permit to increase the rigidity of the fork. Generally, the evaluation is based on uniform load evaluation. If the outer width (or inner width) of the fork is larger, the body structure will be changed significantly.
What work and inspections need to be done after the work of the electric pallet truck is completed

Precautions and inspections after the work of the electric pallet truck is finished

(1) Parking: Park the car in a designated place, and it is forbidden to park the car on a slope. Before leaving the car, the following points should be done: a. Lower the fork to the lowest position naturally; b. Hit the steering wheel to the neutral position; c. Turn off the key switch. (2) Cleaning the car. When cleaning the electric system of the car, compressed air is used. Water cannot be used to clean the electric system. (3) Charging warning: There should be no open flame at the charging place, otherwise it will cause an explosion or fire. (Make a record of the charging situation. Please refer to the battery operation section for the charging method). (4) After finishing the work, wipe clean the dirt on the car, and check the following aspects of the car: a. Keep the warning signs, nameplates, warning signs and other graphic signs of the car intact and clear. This graphic sign is correct The operator has certain guidance, reminding and warning functions. b. Whether there is deformation, distortion, damage or fracture. c. Add lubricating grease according to the situation. d. Replace defective parts.
Ningbo Staxx Material Handling Equipment Co.,Ltd. is one of the world’s leading and most-trusted suppliers to the relevant markets.
If you need pallet stacker truck solution, you should always consult a professional provider. Ningbo Staxx Material Handling Equipment Co.,Ltd. is one such a competent provider that is highly qualified to offer a wide range of products and services. Visit today!
Lucky to know that you are not alone in the face of staxx pallet truck issue. Let Ningbo Staxx Material Handling Equipment Co.,Ltd. be your selected pallet stacker truck expert in providing first class to help you out.
There are many advantages associated with .