What are the precautions for charging the battery of a semi-electric stacker?

The battery of the semi-electric stacker cannot be completely discharged, and it should be charged until the charger sends out a charging completion signal. In fact, there are still many precautions related to battery charging of semi-electric stacker trucks. Next, let's learn related content together. So that we can avoid stepping on thunder when charging the device in the future. Generally, the connection between the charger and the power supply is usually about 14-16 hours. After charging, the voltage of each single battery is about 2.7V, and the electrolyte density of each single battery will reach 1.27-1.29kg/1.25℃. Here we suggest that you should charge the electric stacker in time after using it for more than half of the time, do not leave the equipment for a long time, and charge and maintain the equipment after a short period of time, do not be careless.

The following are the key points that everyone should keep in mind during the charging process: it is not visible that the battery is connected to an open flame, so as to avoid the gas that appears to cause an explosion, cause a fire, and cause unnecessary economic losses and personal injuries. Charging should be done in a well-ventilated environment. We recommend lifting the top cover of the semi-electric stacker, or taking the battery out of the forklift. Temporary wiring is not allowed. Make sure that the insulator wraps the charging cable firmly to ensure the personal safety of the operator. The surface of the semi-electric stacker battery should be kept clean, and the surface of the battery should be wiped with an antistatic cloth. Do not place tools or other metal objects on top of the battery. When charging, the temperature of the electrolyte should not be higher than 45°C. After charging the semi-electric stacker, check the electrolyte level to see if it is 15mm higher than the separator. Under normal circumstances, add distilled water once a week. Avoid contact with the skin and acid, if in contact with the skin, wash with plenty of soapy water, or seek medical attention in time. Used batteries should be disposed of in accordance with local regulations. We also want to talk to you about the battery conversion of semi-electric stackers. You need to start from the following four aspects:

1) Remove the battery firm screws

2) Remove the cable from the battery terminal.

3) Slide or hang out the battery.

4) Install the battery of the semi-electric stacker according to the reverse process indicated below, fasten it and connect it correctly.